Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
Delete unnecessary images (p. 41). “PlayMemories Home” cannot be installed. . An Internet connection is required to install “PlayMemories Home.” . Check the computer environment or installation procedure required to install “PlayMemories Home.” “PlayMemories Home” does not work correctly. . Quit “PlayMemories Home” and restart your computer. Self-diagnosis display/Warning indicators Self-diagnosis display/Warning indicators computer. . Disconnect devices from the USB jack of the computer other than the keyboard, mouse, and your camcorder. . Disconnect the Built-in USB Cable from the computer and your camcorder, and restart the computer, then connect the computer and your camcorder again in the correct order. . When both the Built-in USB Cable and the USB jack of the camcorder are connected to the external devices at the same time, disconnect one that is not connected to a computer. If indicators appear on the LCD screen, check the following. If the problem persists even after you have tried to fix a couple of times, contact your Sony dealer or local authorized Sony service facility. In this case, when you contact them, give them all the numbers of the error code beginning with C or E. You may hear a melody when some warning indicators appear on the screen. C:04:.. . The battery pack is not an “InfoLITHIUM” battery pack (V series). Use an “InfoLITHIUM” battery pack (V series) (p. 13). . Connect the DC plug of the AC Adaptor to the DC IN jack of your camcorder securely (p. 13). C:06:.. . The battery pack temperature is high. Change the battery pack or place it in a cool place. C:13:../ C:32:.. . Remove the power source. Reconnect it and operate your camcorder again. E:..:.. . Follow the steps from . on page 56. . . The battery pack is nearly used up. Others/ GB . The battery pack temperature is high. Change the battery pack or place it in a cool place. . Because the temperature of your camcorder has reached a level where HDMI output has stopped, no image is displayed on the connected monitor, etc. Leave the camcorder until the temperature decreases. However, you can continue recording on the camcorder. . No memory card is inserted (p. 20). . When the indicator flashes, there are not enough free spaces for recording images. Delete unnecessary images (p. 41), or format the memory card after storing the images on other media (p. 54). . The image data base file may be damaged. Check the data base file by selecting . [Setup] .[ Media Settings] . [Repair Img. DB F.] . the recording medium. . The memory card is damaged. . Format the memory card with your camcorder (p. 54). . Incompatible memory card is inserted (p. 20). . . The memory card is write-protected. . Access to the memory card was restricted on another device. . There is something wrong with the flash. . The amount of lights is not sufficient, so camera-shake easily occurs. Use the flash. . The camcorder is unsteady, so camera-shake easily occurs. Hold the camcorder steady with both hands and record the image. However, note that the camera-shake warning indicator does not disappear. . The recording medium is full. . Photos cannot be recorded during processing. Wait for a while, then record. . When [ REC Mode] is set to [Highest Quality ] or [50p Quality ], you cannot capture photos while recording movies. Furthermore, if [ Frame Rate] is set to [25p], you cannot record photos while the camcorder is in movie recording standby mode. . The distance between your camcorder and the subject is too short. Widen the distance (p. 26) or set the zoom to W. Or, select [Manual] in [3D Depth Adjustment] and adjust the depth (p. 52). GB Recording time of movies/number of recordable photos Recording time of movies/number of recordable photos Expected time of recording and playback with each battery pack Recording time Approximate time available when you use a fully charged battery pack. 3D (unit: minute) Continuous Typical recording Battery pack recording time time NP-FV50 70 35 (supplied) NP-FV70 150 75 NP-FV100 300 150 2D (unit: minute) Continuous Typical recording Battery pack recording time time Image quality HD STD HD STD NP-FV50 105 110 50 55 (supplied) NP-FV70 220 235 110 115 NP-FV100 440 470 220 235 . The recording and playback time will be shorter when you use your camcorder in low temperatures. . The recording and playback time will be shorter depending on the conditions under which you use your camcorder. Playing time Approximate time available when you use a fully charged battery pack. 3D (unit: minute) Battery pack NP-FV50 (supplied) 110 NP-FV70 235 NP-FV100 470 2D (unit: minute) Battery pack Image quality HD STD NP-FV50 (supplied) 130 140 NP-FV70 270 290 NP-FV100 535 580 Expected recording time of movies High definition image quality (HD) (unit: minute) Others/ . Each recording time is measured when the camcorder is recording high definition image quality (HD) movies with [ REC Mode] set to [Standard ]. . Typical recording time shows the time when you repeat...
Ce manuel est également adapté pour les modèles :Caméscopes - HDR-TD30VE (4.1 mb)