Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
» A time setting menu is displayed. 6 Tap / to set the hour and minute successively. 7 Tap [OK] to confirm the time setting. » The first-time setup is complete. » The camcorder enters viewfinder mode. Tip • See ‘Use your camcorder - Adjust settings’ for more settings. Select a scene 1 In viewfinder mode, tap to show the system setting menu. 2 Tap [Scene] to enter scene setting. 3 Tap / to select a scene you like. 4 Tap [OK] to confirm the setting. 8 EN 9 English 3 Wait until the status indicator stops flashing and turns to green steadily. » The built-in battery is fully charged. Tip • The camcorder is fully charged for first-time use. • It takes about 3.5 hours to fully charge the built-in battery via the PC. You can also charge the camcorder via a USB adaptor (not supplied) connected to mains power. The charge time is about 2 hours. UK EUR Select a special effect 1 In viewfinder mode, tap to show the system setting menu. 2 Tap [Effects] to enter scene setting. 3 Tap / to select a special effect you like. 4 Tap [OK] to confirm the setting. Charge the built-in battery Note • The USB connector of the camcorder is primarily intended for charging and mass storage purposes. • You can also connect the USB connector of the camcorder to another device (for example, a TV, DVD/Blu-ray player or Home cinema set) for media play. In this case, make sure that the device supports the H.264 file format. • Not all devices that support H.264 file format can play media files in the camcorder through direct USB connection. 1 Press at the bottom of the camcorder to eject the USB connector. 2 Connect the USB connector to a USB socket on a PC. » The status indicator on the shutter button starts flashing in orange. PRESS EN 4 Use your camcorder Record video 1 2 3 4 5 6 Adjust the swivel touch screen to an appropriate position. Switch the mode switch button to . » The selected resolution and remaining recording time are displayed on the swivel touch screen. Hold the camcorder steadily and aim the lens as needed. Press the shutter button to star t recording. » A red time indicator is displayed on the display panel. » The status indicator on the shutter button star ts flashing in red. Press T/W to zoom in/out if necessar y. Press the shutter button again to end recording. » [Recording saved!] is displayed briefly. Take pictures 1 Switch the mode switch button to . » The file size and remaining number of pictures that can be taken are displayed on the swivel touch screen. 2 Hold the camcorder steadily and aim the lens as needed. 3 Press T/W to zoom in/out if necessar y. 4 Press the shutter button down halfway to adjust the focus. 5 Press the shutter button down completely to take a picture. » [Picture saved!] is displayed briefly. Play 1 In viewfinder mode, tap on the swivel touch screen to enter play mode. » The last recorded media is played automatically. 2 Swipe to the left/rights to select a picture or video clip for play. 3 If the selected file is a video clip, tap in the middle of the screen to star t play. • To pause play, tap any place of the swivel touch screen. Preview • In play mode, tap . » The thumbnails of 9 files are displayed on each page. » To select a file, tap the file directly. »Tap / to view the previous/next page. 10 EN Delete a file 1 In play mode, swipe to the left/right on the swivel touch screen to to select a file. 2 Tap to enter the window for deletion confirmation. 3 Tap [Yes] to confirm the deletion operation. » [Deleted!] is displayed briefly. » To exit the operation, tap [No]. You can also delete files in batches. 1 During preview, tap . » A small square box is displayed at the bottom right corner of each file. 2 Tap a square box to select the file. » A check mark is displayed in the square box. 3 Repeat step 2 to select more files. 4 Tap [Confirm] to confirm deletion of all the selected files. Tag a file 1 Tap the left ruler and move to the right to set the star ting point you want. 2 Tap to tag the file. • To untag the file, tap again. 3 Repeat steps 1 to 2 to tag more files. You can also tag files during preview. 1 During preview, tap . » A small square box is displayed at the bottom right corner of each file. 2 Tap a square box to tag the file. » A check mark is displayed in the square box. »To untag the file, tap again. 3 Repeat steps 1 to 2 to tag more files. Play tagged files 1 During preview, tap again. » A tag operation menu is displayed. 2 Tap an option to highlight it, then tap [Yes] for confirmation. Menu option Description [Play all] Play all files. [Play tagged] Play tagged files only. [Quick impression] Play excerpts of tagged files. [Clear all tags] Untag all files. Trim a video clip Note • Only video files not recorded with ‘Dual recording’ can be edited (trimmed) on the camcorder. 1 In play mode, swipe to the left/right on the swivel touch screen to select a recorded video clip. 2 Tap to enter the trim window. » A bar for video trimming is displayed at the top of the window. 3 Tap the ...