Évaluations - 3, GPA: 3.7
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
Set your camcorder to recording standby (p. 28). • You can capture up to 3 still images only during movie recording. • The “Memory Stick Duo” has run out of space. Use a new “Memory Stick Duo” or format the “Memory Stick Duo” (p. 58). Or delete the unnecessary images (p. 47). • You cannot record a still image together with: – [SMTH SLW REC] – [FADER] – [D.EFFECT] – [PICT.EFFECT] The ACCESS lamp remains lit or flashing even when you stop recording. • Your camcorder is recording the scene you have just shot on the hard disk. The recording angle looks different. • The recording angle may look different depending on the condition of your camcorder. This is not a malfunction. The flash does not work. • You cannot record with the flash with: – Capturing still images while shooting a movie – If a conversion lens (optional) is attached • Even if auto flash or (Auto redeye reduction) is selected, you cannot use the internal flash with: – NightShot – [SUPER NIGHTSHOT] – [TWILIGHT], [CANDLE], [SUNRISE&SUNSET], [FIREWORKS], [LANDSCAPE], [SPOTLIGHT], [BEACH] or [SNOW] in [SCENE SELECTION] – [MANUAL] in [EXPOSURE] – [SPOT METER] Troubleshooting 87 The actual recording time for movie is less than the expected approximate recording time of the hard disk. • Depending on an object, such as a fast moving object, the time available for recording may shorten (p. 11, 63). The recording stops. • The temperature of your camcorder is extremely high. Turn off your camcorder and leave it for a while in a cool place. • The temperature of your camcorder is extremely low. Turn off your camcorder and take it to a warm place. Leave the camcorder there for a while, then turn on the camcorder. • If you keep applying vibration on the camcorder, recording may stop. There is a time difference between the point where you press START/ STOP and the point that the recorded movie starts/stops. • On your camcorder, there may be a slight time difference between the point where you press START/STOP and the actual point that recording movie starts/stops. This is not a malfunction. The movie aspect ratio (16:9 (wide)/ 4:3) cannot be changed. • The aspect ratio of the movie recorded with HD (high definition) image quality is 16:9 (wide). The auto focus does not function. • Set [FOCUS] to [AUTO] (p. 78). • The recording conditions are not suitable for auto focus. Adjust the focus manually (p. 78). [STEADYSHOT] does not function. • Set [STEADYSHOT] to [ON] (p. 65). • [STEADYSHOT] may not be able to compensate for excessive vibrations. • For HDR-SR5E: [STEADYSHOT] cannot be used while recording still images. The BACK LIGHT function does not function. • The BACK LIGHT function cannot be used during Easy Handycam operation. The subjects passing by the screen very fast appear crooked. • This is called the focal plane phenomenon. This is not a malfunction. Because of the way the image device (CMOS sensor) reads out image signals, the subjects passing by the lens rapidly might appear crooked depending on the recording conditions. Tiny spots in white, red, blue, or green appear on the screen. • The spots appear when you are recording with [SUPER NIGHTSHOT] or [COLOR SLOW SHTR]. This is not a malfunction. The color of the image is not correctly displayed. • Set the NIGHTSHOT switch to OFF (p. 31). The screen image is bright, and the subject does not appear on the screen. • Set the NIGHTSHOT switch to OFF (p. 31). The screen image is dark, and the subject does not appear on the screen. • Press and hold DISP/BATT INFO for a few seconds to turn on the backlight (p. 21). Horizontal stripes appear on the images. • This occurs when recording images under a fluorescent lamp, sodium lamp, or mercury lamp. This is not a malfunction. Black bands appear when you record a TV screen or computer screen. • Set [STEADYSHOT] to [OFF] (p. 65) (HDR-SR5E). [SUPER NIGHTSHOT] cannot be operated. • Set the NIGHTSHOT switch to ON. [COLOR SLOW SHTR] does not operate correctly. • [COLOR SLOW SHTR] may not operate correctly in total darkness. Use NightShot or [SUPER NIGHTSHOT]. You cannot adjust [LCD BL LEVEL]. • You cannot adjust [LCD BL LEVEL] when: – The LCD panel is closed on your camcorder with the LCD screen facing out. – The power is supplied from the AC Adaptor. Playing back images on your camcorder Still images stored on a “Memory Stick Duo” cannot be played back. • Still images cannot be played back if you have modified files or folders, or have edited the data on a computer. (The file name flashes in that case.) This is not a malfunction (p. 101). • Still images recorded on other devices may not be played back. This is not a malfunction (p. 101). “ ” is indicated on an image in the VISUAL INDEX screen. • This may appear on still images recorded on other devices, edited on a computer, etc. • You removed the AC Adaptor or the battery pack before the ACCESS lamp is turned off after recording. This may damage your image data and is displayed. “ ” is indicated on an image in the VISUA...
Ce manuel est également adapté pour les modèles :Caméscopes - HDR-SR5E (4.39 mb)
Caméscopes - HDR-SR7E (4.39 mb)