Évaluations - 3, GPA: 3.3 ( )

Fabricant : Sony Taille : 1.39 mb Nom Fichier : Langue d'enseignement:

Photos et spécifications   Sony  MHS-TS20K

*3 Typical recording time shows the approximate time available of a fully charged battery pack when you repeat recording start/stop, turning the power on/off and zooming. Recording time*1 Continuous recording time*2 Approx. 120 min. Typical recording time*3 Approx. 70 min. Playback time Approx. 150 min. zChecking the remaining battery charge A remaining charge indicator appears on the upper right of the LCD screen. • The displayed battery remaining indicator may not be correct under certain circumstances. • If the camera is running on battery power and you do not operate the camera for about 5 minutes, the camera turns off automatically to prevent wearing down the battery (Auto power off function). • The Language/Clock Setting screen appears when the camera is turned on for the first time (page 26). • It takes about one minute until the correct battery remaining indicator appears. High Low 23GB contents Operation Search Settings Search Index Installing the software You can do the following using the Bloggie Software (pre-loaded on the internal memory). – Import images shot with the camera to a computer, and play back. – Upload images to a network service. 1Press the ON/OFF (Power) button to turn on the camera. 2Connect the camera (turned on) to the computer (page 21). When the USB connection is completed, [Mass Storage] appears on the LCD screen of the camera. 3Activate the installer. Windows 7 1Click [Open folder to view files] on the AutoPlay screen. ON/OFF (Power) button 2 Double-click “Setup_Bloggie_Windows.exe” in the folder. Windows Vista/Windows XP 1 Click [Setup Bloggie Software] on the AutoPlay screen. • If the AutoPlay screen does not appear, click [Start] t [Computer] (in Windows XP, [My Computer]), then double-click [Bloggie Software] t “Setup_Bloggie_Windows.exe.” 24GB Continued r Macintosh 1 Double click the [BLOGGIE_SW] icon. Table of contents Operation Search Settings Search Index 5Delete the USB connection between the camera and computer after the 2 Double click [Setup Bloggie Mac.dmg]. 3 Double click the “Bloggie” icon. 4 Click [Install], and follow the instructions on the screen to complete the installation. installation is completed (page 22). • For details on the Bloggie Software, see page 48. Notes • If you turn on or restart the computer while the camera is connected to the computer, the camera may malfunction. In this case, press and hold the ON/OFF (Power) button for at least 7 seconds, and force- quit the camera. Disconnect the camera from the computer before turn on or restart the computer. • Even if you delete files such as “Setup_Bloggie_Windows.exe”/“Setup_Bloggie_Mac.dmg” in the [Bloggie Software] folder, the recording capacity of the camera does not increase. 25GB contents Operation Search Settings Search Index Setting the language and clock 1Press the ON/OFF (Power) button. The camera is turned on. The demonstration movie plays back when you turn on the camera for the first time. 2Select the desired lang...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :