A Connect the aerial, recorder and TV as shown in the illustration. B Connect an optional 21-pin SCART cable between the EURO AV1 AUDIO/VIDEO connector on the rear of the recorder and the TV’s 21-pin SCART connector. —5— D Perform Plug&Play setup Initial Settings The TV should be set to its AV mode (with AV connection . 5) or UHF channel 36 (with RF connection . 5). Plug the mains power cord into a mains outlet. Turn on the recorder. The Country Set screen appears. Press weto select your country

NOTES: . If you have programmed the recorder to timer-record 2 or more programmes, the second programme and those thereafter may not fit on the tape if you set “AUTO SP]LP TIMER” to “ON”. In this case, make sure the mode is not engaged, then set the tape speed manually during timer programming. . In order to ensure that the recording fits on the tape, this feature may leave a slight non-recorded section at the end of the tape. . There may be some noise and sound disturbance at the point on the t

4 S-VIDEO Connection .............................. 5 INITIAL SETTINGS 6 Video Channel Set ................................... 6 Auto Set Up ............................................ 8 On-Screen Displays .............................. 10 Select Language ..................................... 11 Clock Set ............................................... 12 PLAYBACK 13 Basic Playback ...................................... 13 Playback Features ................................. 14 RECORDING 19 Basi

. When using a monaural camcorder, connect its AUDIO OUT connector to the AUDIO L input connector on your recorder. . When a Master Edit Control-equipped JVC camcorder is used, the camcorder is capable of controlling the recorder. Refer to the camcorder's instruction manual for operating procedure. B Set recorder’s input mode Press number key “0” and/or PR +/– to select “F-1” for the AUDIO/VIDEO input connectors, or “S-2” for the AUDIO/SVIDEO input connectors, depending on the connectors being u

“CTL”, “TC” or “UB” will be shown on the counter display. 3. Engage the Remote mode. To operate this unit locally, press the [REMOTE] button so that the [REMOTE] indicator on the counter display goes out. To operate this unit via the RS-422 or RS-232C serial remote interface, press the [REMOTE] button so that the [REMOTE] indicator lights. Menu switch setting Set the menu switches as required. • Reference sync signal items * Select the reference sync system. No. 003 .....Pag

INPUT SEL. SERIAL 9PIN WIRELESS LINE DV Y/C INPUT SEL. switch Backup unit: the main unit LIGHT ON OFF COUNTER CTL TC UB RESET OPERATE/WARNING MONITOR SELECT SHUTTER STATUS MENU FILTER 1 3200k 2 5600k 3 5600k+ND NG POWER GAIN OUTPUTWHT.BAL VTR ON OFF ALARM MONITOR SAVE STBY H M L BARS CAM AUTO KNEE PRST A B ONOFF CH-1 AUDIO CH-2 LEVEL AUTO IRIS LOLUX BACK L NORMAL SPOT L STRETCH NORMAL COMPRESS FULL AUTO BLACK DV cable DV terminal DV terminal Memo • Backup recording records the video and sound fr

CUE5 ––:––:––:– – EXI T “SET ” : ENTRY CUE DATA “RESET ” : CLEAR CUE DATA “CUE UP ” : EXECUTE CUE UP During Cue-up operation Memo . For cue-up operation, use tapes with continuous time codes recorded. . If the COUNTER switch is set to CTL or UB while the Multi Cue-up screen is be- ing displayed, the COUN- TER mode does not change. 56 OFF TIMER REC PLAY VIDEO LINE IN OUT MONITOR OUT DC12V DV IN/OUT IN OUT OFF AUDIO REMOTE2 R-Y B-Y IN SYNC IN TIME CODE IN OUT Y COMPONENT OUT CH 1/3 CH 2/4 IN OUT M

is complete. 03CASSETTE OUT : The VCR outputs this command when RS232C ejected the tape. 05NOT TARGET : The VCR outputs this command when the operation specified with Cue Up with Data/ Preroll failed to be completed. 0A ACK : This command is returned when a defined command is received. . Error commands These are commands that are returned when transmitted data cannot be received by the VCR properly. Commands that release errors are also available. Command Description 02ERROR : This command is re

They are displayed when the DISPLAY mode is ON or AUTO. Display Contents INVALID TAPE! Data tapes for PC use or DVC PRO tapes has been inserted. The cassette will be ejected. LP TAPE! The user attempts to play back a tape recorded in the LP mode. This unit cannot record or play in the LP mode. NO DV SIGNAL The user attempts to record without DV signal input. Display Contents COPY INHIBIT The user attempts to record signals protected with the copy guard. REC INHIBIT The user attempts to record on

To specify the cue point, transmit the time data (hour: minute: second: frame, a total of 8 bytes with 2 bytes for each) following this command. B5 F-SHUTTLE Shuttle play. The search speed is specified by sending the speed code data after this command (see the table below). Speed code table (corresponding speed) Speed code Search speed 30h Still 31h 0.1 33h 0.2 34h 0.3 35h 1 36h 2 37h 5 38h 10 32 33 11 RS-232C INTERFACE 11 RS-232C INTERFACE 11 RS-232C INTERFACE Commands Description B6 R-SHUTTLE