Évaluations - 4, GPA: 4.5
(
)
)
|
Facilité d'utilisation
Try entering a different code assigned to your brand and/ or repositioning the equipment (see page 11). If the answer is still NO, cable box or DSS receiver control is not available. Push MENU and go to the Alternate Instructions on page 14. If Cable Box - CABLE/DSS BOX SET UP ■ IS YOUR CABLE BOX RECEIVING CH 09 ? ngg NO ? If DSS Receiver IS YOUR DSS RECEIVER RECEIVING CH 200? vm NO SELECT : ROTATE WHEEL SET : PUSH WHEEL END : PUSH MENU KEY Rotate and push the WHEEL to select and set the local PBS channel number you receive on your cable box. * If you live near a different time zone, enter the channel in your time zone. ...... SET CLOCK ....... PLEASE ENTER YOUR LOCAL PBS CHANNEL ON CABLE BOX HilEJ SELECT : ROTATE WHEEL SET : PUSH WHEEL END : PUSH MENU KEY VCR Oil I CH |y Confirm that your cable box is on and that your DSS Box is off. Push WHEEL to start CHANNEL AUTO SET and AUTO CLOCK SET. The following displays appear in sequence: “CH AUTO SET PROCEEDING” “CH AUTO SET COMPLETED” “AUTO CLOCK SET PROCEEDING” This display appears when auto clock set is completed. Confirm that the time is correct and push CH A to exit. 12/25/1996 WED 12:00PM DST: ON SETTING : CH02 AUTO CLOCK SET COMPLETED END : PUSH CH UP KEY If the Auto Clock Set displayed time is incorrect If you use a cable box and receive more than one PBS station, try auto clock set again. Follow the Set or Reset Auto Clock Set steps and when the instructions call for you to enter a PBS station, make sure to enter the one you have not tried yet. If AUTO CLOCK SET INCOMPLETE appears The screen below will appear on-screen if auto clock set data is not available in your area. AUTO CLOCK SET IS INCOMPLETE PUSH MENU TO SET CLOCK Push MENU to display the manual clock set screen. (See the “Manual Clock Set” section on page 14.) Note: If you use a cable box and receive more than one PBS station, you may exit the manual clock set screen and try auto clock set again. Follow the Set or Reset Auto Clock Set steps and when the instructions call for you to enter a PBS station, make sure to enter the one you have not tried yet. • Auto clock set will be performed when the VCR is turned off for the first time each day. If you use a cable box and you want auto clock set to be performed, the cable box must be left on at the time the VCR power is turned off. 13 Getting Started One Time VCR Setup Alternative Instructions Complete the following steps if, during one time setup, any of the following applies: A You selected NO in step 4 on page 12 (you do not use a cable box or DSS receiver). B You selected connection method 2 (VCR-CABLE DSS BOX- TV) in step 5 on page 12. C You selected NO in step 7 on page 12 (your cable box or DSS receiver is not remote controllable). D You use a DSS receiver and selected YES in step 10 on page 13. E Cable Box or DSS receiver can not be controlled in step 10 on page 13. Turn on the cable box and set it to the local PBS channel. • If you live near a different time zone, make sure to set the channel in your time zone. • If you use a DSS receiver, it must be turned off. CHANNEL/CLOCK AUTO SET CONNECT ANTENNA CABLE AND IF YOU USE A CABLE BOX. TUNE IT TO YOUR LOCAL PBS CH THEN. .. PLEASE PUSH CH UP KEY VCR I9l Push CH A to start CHANNEL AUTO SET and AUTO CLOCK SET. The following displays will appear in sequence. “CH AUTO SET PROCEEDING” “CH AUTO SET COMPLETED" “AUTO CLOCK SET PROCEEDING” This screen appears to confirm that auto clock set is completed. VCR iSl» Confirm that the time is correct and push CH A to exit this screen. If this screen appears, auto clock set is not available in your area. Please set the clock manually as described at right. 12/25/1996 WED 12:00PM DST: ON SETTING : CH02 AUTO CLOCK SET COMPLETED END : PUSH CH UP KEY AUTO CLOCK SET IS INCOMPLETE PUSH MENU TO SET CLOCK If the displayed auto clock set time and D.S.T. are not correct If you live close to two different time zones, the VCR may recognize the wrong PBS station as the setting channel. If this happens, please complete the following steps. 1 Make a note of the SETTING: CH number on screen and push CH A to exit. 2 Delete the setting channel form channel memory. (See the Add or Delete a Channel section on page 15.) 3 Push MENU button to display the menu. 4 Use the Wheel to select “SET CLOCK" and then to select “AUTO SET." • If you use a cable box and have multiple PBS stations, tune the cable box to a different PBS station and try auto clock set again using the menu. 14 Manual Clock Set (In case Auto Clock Set could not be performed) -YI7-- SET CLOCK...... /|\ BY ROTATING WHEEL :PUSH WHEEL-* TO END PUSH MENU KEY 1 Push MENU to display the set clock screen. 2 Rotate and push the Wheel to select and enter the month, date, year, time and D.S.T. {Daylight Saving Time). • “DST:ON” automatically adjusts for daylight saving time. (See page 5.) To Make Corrections, push the Wheel or CLEAR...