Évaluations - 4, GPA: 4
(
)
)
|
Facilité d'utilisation
The operations on the VCR and the remote commander correspond as follows: To Do this on the VCR Do this on the remote commander Confirm the setting and go to the next setting Press EASY TIMER knob Press EASY TIMER Change the time by 15 minutes (in START/STOP mode) Turn EASY TIMER knob or hold PROGRAM +/-down Hold PROG +/- down Change the time by one minute (in START/STOP mode) Press PROGRAM +/- Press PROG +/- Select the programme Turn EASY TIMER knob or press PROGRAM +/- Press PROG +/- or INPUT SELECT Change the hour/minute by one hour/minute (in CLOCK mode) Turn EASY TIMER knob or press PROGRAM +/- Press PROG +/- You can also use the programme number buttons to set the clock, start and stop times, and the programme you want to record. Just press the programme number buttons to enter the hours and minutes. For example: • To set the clock to "8:20”, press 0, 8, I EASY TIMER , 2, 0 and | EASY TIMER in sequence. • To set the start or stop time to "8:20”, press 0, 8, 2, 0 and EASY TIMER in sequence. If you make a mistake, re-enter the correct digits before pressing EASY TIMER . 28 Basic Operations To stop recording To stop the VCR while recording, press ■ STOP. To check or change the timer setting Press the EASY TIMER knob repeatedly until the setting you want to check or change flashes. Then re-enter the new setting, if necessary. If you do not want to change any of the settings, press the EASY TIMER knob repeatedly until the © indicator appears in the display window. You can also change the timer setting using the TIMER SET/CHECK menu. For details, see page 35. To cancel the timer setting To cancel the Easy Timer setting while doing the setting, press CLEAR on the remote commander or press PROGRAM + and - on the VCR at the same time. To use the VCR after setting the timer To use the VCR before a timer recording begins, just press 1/1. The © indicator turns off and the VCR switches on. Remember to press 1/1 to reset the VCR after using the VCR. You can also do the following tasks while the VCR is recording: • Reset the counter. • Display tape information on the TV screen. • Check the timer settings. • Watch another TV programme. To watch the recorded programme right after the Easy Timer recording The SEARCH indicator starts flashing when the VCR finishes the Easy Timer recording. To watch the recorded programme, press the EASY TIMER knob. The VCR turns on, starts searching, then automatically starts playback from the beginning of the recording. For details, see page 37. continued_ Basic Operations 29 Basic Operations Recording TV programmes using the Easy Timer function (continued) Tips • To record from a source connected to LINE-1 IN jacks, press INPUT SELECT or PROG +/- or turn the EASY TIMER knob to display "L” in the display window. • To record NTSC signals, set the tape speed to SP or EP. To set to the EP mode, display "LP” in the display window. Notes • You cannot set the Easy Timer if eight programmes have already been set. • You can set the timer for only one programme using the Easy Timer function. If you want to set the timer for other programmes, use the TIMER SET/CHECK menu. For details, see page 31. • You cannot set the date using the Easy Timer function. Set the date using the CLOCK SET menu if you want to set the timer with the menu. For details, see page 16. • The © indicator flashes in the display window when you complete the setting with no tape inserted. 30 Basic Operations Setting the timer manually You can preset up to eight programmes at a time. Before you start. • Check that the VCR clock is set to the correct time. • Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording time. • Turn on your TV and set it to the video channel. I/o CD CD CD QQ '0 '0 ‘0 ■0 ‘0 ‘0 '0 ‘0 '0 'О ‘0 ■ ©I PROG +/- INPUT SELECT MENU OK M/m/ Ce manuel est également adapté pour les modèles :
joueurs de magnétoscope / vidéo - SLV-ED15PS (725.1 kb)
joueurs de magnétoscope / vidéo - SLV-ED25PS (725.08 kb)
joueurs de magnétoscope / vidéo - SLV-ED33ME (725.08 kb)
joueurs de magnétoscope / vidéo - SLV-ED33MJ (725.08 kb)