Évaluations - 2, GPA: 5 ( )

Fabricant : Sony Taille : 341.56 kb Nom Fichier : Langue d'enseignement:

tape and the unit’s mechanism when there is something wrong with the tape or when the mechanism is overloaded. Press ?/1 ON/STANDBY to restart the unit. If the unit does not work after mains lead from the mains. Wait for at least 15 work, please consult your nearest Sony service facility. The playback picture does not • Make sure the TV is set to the video channel. If you appear on the TV screen. are using a monitor, set it to video input. position corresponding to the colour system which the tape was recorded with. • The video heads are dirty (see below). Clean the video heads using the Sony T-25CLD, T-25CLW or E-25CLDR video head cleaning cassette. If these cleaning cassettes are not available in your area, have the heads cleaned at your nearest Sony service facility (a standard service charge will be required). Do not use a commercially available liquid type cleaning The tape starts playing as soon • The safety tab has been removed. To record on this as it is inserted. tape, cover the tab hole. The tape is ejected when you • Check that the safety tab has not been removed. press z REC. Nothing happens when you • Make sure the tape is not at its end. press z REC. A tape cannot be inserted. • Check that a tape is not already in the tape compartment. with new ones if they are weak. The unit needs to be cleaned. • Clean the cabinet, panel, and controls with a dry soft cloth, or a soft cloth slightly moistened with a mild Approx. 355 . 96 . 293 mm (w/h/d) detergent solution. Do not use any type of solvent, LINE IN (SLV-GA55ME/MES/PS/SG/TH and including projecting parts and controls GA65MJ) such as alcohol or benzine. Mass Demonstration mode The demonstration mode will activate when you press STD PICT and the RESOLUTION CONTROL II down button on the unit at the same time. When demonstration mode starts during playback, RESOLUTION CONTROL II menu appears and the level of picture adjustment changes automatically. When demonstration mode starts during power off and Synchronised Recording off, the indicator lights on the unit flash. To cancel the demonstration mode Press STD PICT. • Do not install the unit in an inclined position. It is designed to be operated in a horizontal position only. • Keep the unit and cassettes away from equipment with strong magnets, such as microwave ovens or large loudspeakers. • Do not place heavy objects on the unit. colour monitor for the PAL colour system. cassette, as it may damage the video heads. • The video heads may have to be replaced. Consult your local Sony service facility for more information. The picture rolls vertically • Adjust the vertical hold control on the TV or monitor. during picture search. The picture has no sound. • The tape is defective. • If you made A/V connections, check the audio cable connection. VIDEO IN, phono jack (1) Input signal: 1 Vp-p, 75 ohms, unbalanced, sync negative AUDIO IN, phono jack (1) Input level: 327 mVrms Input impedance: more than 47 kilohms LINE OUT VIDEO OUT, phono jack (1) Output signal: 1 Vp-p, 75 ohms, unbalanced, sync negative AUDIO OUT, phono jack (1) Standard output: 327 mVrms Load impedance: 47 kilohms Output impedance: less than 10 kilohms Approx. 3.8 kg Supplied accessories Remote commander (1) R6 (Size AA) batteries (2) Aerial cable (1) Plug adaptor (SLV-GA35ME, GA55ME, GA55MES and GA65MJ only) (1) Design and specifications are subject to change without notice. The indicator lights on the unit are flashing. • The demonstration mode has been turned on. Cancel The RESOLUTION CONTROL II the demonstration mode by pressing STD PICT. menu appears automatically. * SLV-GA55ME/MES/PS/SG/TH and GA65MJ only Auto head cleaner The unit incorporates an auto head cleaner which cleans the video heads when a tape is loaded or unloaded. When the heads are not sufficiently clean, even after a tape has been loaded/unloaded several times, use a video head cleaning cassette. Symptoms caused by contaminated video heads • Normal picture • Rough picture • Unclear picture • No picture (or black & white screen appears) initial terminal contamination Sapphire tape cleaner The unit incorporates a sapphire tape cleaner which cleans a video tape when it is loaded. This cleaner can prevent the video heads from contamination by removing...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :