Évaluations - 1, GPA: 5 ( )

Fabricant : Creda Taille : 252.81 kb Nom Fichier : 3c6087a5-8999-4750-8114-3405ff4cc62f.pdf Langue d'enseignement:

Nos: TSR12AW TSR18AW TSR24AW TSR12MW T5R18MW TSR24MW IMPORTANT INSTRUCTIONS Retain these instructions for future reference, read them carefully and note also the information given on the heater. IMPORTANT SAFETY INFORMATION WARNING - THE SURFACE OF THIS HEATER CAN BE HOT The surface temperatures of this heater are within the requirements of EN60-335 the European Standard covering the safety requirements of electric storage heating appliances, and momentary contact with any part of the heater should not cause injury. However, in order to be effective, heaters of any type do get hot, especially around the air outlet qrille. Therefore, if aged or infirm persons, or young children, are likely to be left unsupervised in the vicinity of a heater, precautions should be taken to ensure that prolonged contact with the heater cannot occur. We recommend that a guard is fitted around the heater, as is normal with some types of heating appliances in simitar circumstances. A range of guards for Creda storage heaters is available. If you require further information on these guards, please contact Applied Energy Products Ltd on (01 733) 456 789. • DO NOT COVER THE SURFACES OF THE HEATER AND DO NOT OBSTRUCT AIR OUTLET GRILLES Surfaces of the heater should not be covered or obstructed as this can cause excessive temperatures that can be hazardous and may cause safety cutouts to operate. For example, do not put clothes, fabrics or any combustible materials on the heater or allow curtains to come within 250mm (10") of the top of the heater and 75mm (3") of the ends of the heater, and do not allow furniture to be pushed up against the heater. • DO NOT ATTEMPT TO MOVE THE HEATER. YOUR STORAGE HEATER IS VERY HEAVY. For safety m use the heater must be securely fixed to a sound wall and specialist advice must be sought before moving. If you are not happy that the heater has been securely fixed, please inform your installer. • DO NOT SIT OR STAND ON THE HEATER. • DO NOT SPILL LIQUIDS ONTO THE APPLIANCE. IF YOU DO, SWITCH THE HEATER OFF AND GET A QUALIFIED ELECTRICIAN TO CHECK IT. • DO NOT POKE OBJECTS THROUGH THE GRILLE OR VENTILATION SLOTS. » DO NOT USE POLISHES ON THE HEATER OR ON FURNITURE NEAR TO IT. • The hot interior of the heater can produce paraffin smells from polish vapours which may last for a number of hours. • DO NOT ATTEMPT TO REPAIR THE HEATER YOURSELF. I n case of breakdown or other failure, switch off the heater at the wall switches and consult your supplier, local electricity company or Applied Energy Products Ltd. Always ensure that the heater is switched off at both wall switches and the fuses removed before any repair is carried out. FIRST HEATING OF A NEW HEATER: The new heater will give off a slight smell and it is recommended this smell should be got rid of quickly by running the heater straight up to its maximum temperature, whatever the prevailing weather. Set both control knobs to the maximum settings of 6 and run the heater li...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :