Log:
Évaluations - 4, GPA: 3.8 ( )

Instructions EverFocus, Modèle EDSR 110

Fabricant : EverFocus
Taille : 9.62 mb
Nom Fichier :
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


Change these settings as described here and click the Save Settings button to apply your changes or Cancel Changes to cancel your changes. 101 The Applications and Gaming Tab allows you to set up public services on your network, such as web servers, ftp servers, e-mail servers, or other specialized Internet applications. (Specialized Internet applications are any applications that use Internet access to perform functions such as videoconferencing or online gaming. Some Internet applications may not require any forwarding.) To forward a port, enter the information on each line for the criteria required. Descriptions of each criterion are described here. 102 Application -In this field, enter the name you wish to give the application. Each name can be up to 12 characters. Start/End -This is the port range. Enter the number that starts the port range under Start and the number that ends the range under End. Protocol - Enter the protocol used for this application, either TCP or UDP, or Both. IP Address -For each application, enter the IP Address of the PC running the specific application. Enable - Click the Enable checkbox to enable port forwarding for the relevant application. Change these settings as described here and click the Save Settings button to apply your changes or Cancel Changes to cancel your changes. 103 104 Example: (Here we open ports for up to 10 clients) DVR 80 to 80 Both 192.168.1.50 Enable DVR 1600 to 1610 Both 192.168.1.50 Enable DVR 37260 to 37270 Both 192.168.1.50 Enable . Note: If your Internet service provider blocks port 80 and you are using a different port to access the DVR through the DVR’s Network Menu Setup please open those specific ports in this section of the router. . Note: If you wish to have multiple users log into the DVR please open a range for the control and data ports on your router. For example if you would only like 4 clients to connect to the DVR open 1600-1603 and 37260 ~ 37263 The following is the address you would type: IP address of your internet service provider: 8100 105 12. D-Link Port Forwarding This chapter will cover a few simple configurations for the D-Link router. Please understand we do not support this product and will not give tech support on it. If you need Technical support on this router you must call D-Link. This Chapter is to offer some help to the installer and end user nothing more. . The next step is to open ports within your router. Go to Virtual Server in the router. Chapter 12 Example: Firewall -Select Enabled or Disabled Name -Enter the name referencing the virtual service Action – Either Allow or Disallow its use. Source -The server computer in the WAN (Wide Area Network) that will be providing the virtual services. If you have a Web server that you wanted Internet users to access at all times, you would need to enable it. Simply place a *. Private IP -The server computer in the LAN (Local Area Network) that will be providing the virtual services. If you have a Web server that you wanted Internet users to access at all 106 107 times, you would need to enable it. Web (HTTP) server is on LAN (Local Area Network) computer 192.168.1.10 HTTP uses port 80, TCP and UDP. Protocol Type - The protocol used for the virtual service. Public Ports - The port number on the WAN (Wide Area Network) side that will be used to access the virtual service. Schedule - The schedule of time when the virtual service will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. If it is set to Time, select the time frame for the service to be enabled. If the system time is outside of the scheduled time, the service will be disabled. . The next step is to open ports within your router. Open virtual ports in the router. o EDR Ports to open: 80, 1600, 1601, 1602, 1603, 37260, 37261, 37262, 37263 . Note: If your Internet service provider blocks port 80 and you are using a different port to access the DVR through the DVR’s Network Menu Setup please open those specific ports in this section of the router. . Note: If you wish to have multiple users log into the DVR please open a range for the control and data ports on your router. For example if you would only like 4 clients to connect to the DVR open 1600-1603 and 37260 ~ 37263 . If your Internet Service Provider Blocks port 80. Simply do the following: o Change the HTTP port from 80 to 8100 in the NETWORK MENU. . To access the DVR from a computer simply open Internet Explorer and in the address bar type: The following is the address you would type: (IP address of your internet service provider): 8100 108 13. EverFocusDDNS Setup Note: You MUST have firmware version 1.6.2 or higher in order to use the EverFocus DDNS server. . Set up the Network Menu according to the instructions detailed in the Networking chapter. . Go to the website and check for an available name. . In DVR’s Network Menu, go to DDNS. Choose “everfocusddns.com” fo...

Ce manuel est également adapté pour les modèles :
Vidéo - 920 (9.62 mb)
Vidéo - EDR 410 (9.62 mb)
Vidéo - EDR 810 (9.62 mb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories