Évaluations - 3, GPA: 3 ( )

Fabricant : Honeywell Taille : 1.43 mb Nom Fichier : Langue d'enseignement:

Also used to enter numeric passwords for Buttons the various login screens. F PTZ Selects PTZ mode in live display GOTO for controlling PTZ cameras MENU Displays the Setup menus SEARCH Displays the Search menu Preset - for controlling PTZ cameras BACKUP Displays the Archive menu Preset + for controlling PTZ cameras DISPLAY Selects various display modes in live display and playback Focus - for controlling PTZ cameras FREEZE Displays the freeze image in live view Focus + for controlling PTZ cameras PANIC Records using the Panic Recording setup Iris - for controlling PTZ cameras SEQUENCE Changes to the Sequence screen Iris + for controlling PTZ cameras G Shuttle Wheel Used to quickly adjust the playback speed and direction. Also used to control the camera zoom when in PTZ mode and the digital zoom level in live display mode JOG Ring When playback is paused, used to move footage forwards or backwards, frame by frame HREP Color Digital Video Recorder User Guide Rear Panel Description Figure 2-2 Rear Panel Example shown is the 16 channel model. The back panel layout might vary based on the model of the DVR. A B ED G H I C F Table 2-2 Rear Panel Description Group Name Description A CAMERA INPUTS Connect up to 4/8/16 camera inputs (depending on your model). B MONITOR Main BNC monitor. SPOT OUT BNC spot monitor. C AUDIO INPUTS/ OUTPUTS Up to 4 audio inputs and one audio output can be connected. D PAL/NTSC Switch Change the camera input type. E ALARM INPUTS Up to four alarm inputs can be connected and configured as high or low inputs with common ground. RELAY OUTPUT One alarm output can be connected and configured as high or low output with a common ground. F RS485 Connect a PTZ camera. G LAN LAN connection to a router or internal network. H DVI DVI main monitor connection to a PC monitor or a plasma screen. Note If you want to connect to a VGA monitor, please use a DVI-to-VGA converter (supplied). I POWER Connect to a 12V/5A adapter (supplied). Document 800-06847 Rev B 25 08/10 Installation Remote Control Figure 2-3 Remote Control Description POWER System power On/Off ID button Select DVR ID RETURN Cancel/Deselect Previous screen SETUP Open System Setup menu Channel selection buttons AUDIO Not supported ENTER Apply/Select/Go to next screen Navigation Buttons Used for playback control, menu navigation, and PTZ/focus control DISP Change the display screen SEARCH Go to Search mode PTZ Go to PTZ menu PANIC Start panic recording KEYLOCK Lock the Remote/Front keys SEQUENCE Change to Sequence mode ZOOM Enter Zoom mode ARCHIVE Enter the Backup menu Note If there are several co-located DVRs, each DVR must be set with a different ID. Using the remote control, you can set an ID for each DVR. Then all DVRs can be controlled with one remote control. HREP Color Digital Video Recorder User Guide Setting the DVR ID Using the Remote Control 1. Press the ID button on the remote control. An Input ID message displays. 2. Press the Set ID, then press RETURN. Returning to the Original ID Settings 1. Press the ID button again. 2. Enter 255, then press the RETURN button on the remote control. DVR Operation Making the connections Connect: • up to 16 camera inputs (DVR model dependent) • monitors to the DVR using the Composite or DVI connections • power to the DVR. The DVR checks for proper power connection, and then emits two beeps. Powering up the DVR Press the POWER button on the front panel of the DVR to begin operation. The Startup screen appears. Document 800-06847 Rev B 27 08/10 Installation Figure 2-4 Startup Screen The DVR startup screen detects and checks the status of the hard drives and the CDRW/DVD-RW drive. Logging On After startup diagnostics are complete, you must log onto the system. The default user name is ADMIN. Figure 2-5 Log On Screen Enter the default password 1234 using the channel selection buttons, then press ENTER. The DVR begins normal operation and shows the default display of 4, 8, or 16 channels (depending on your DVR model). HREP Color Digital Video Recorder User Guide Figure 2-6 Default Display Navigating the Default Display The control bar at the bottom of the screen when the DVR is first turned on. After that, it will show the current time and date. Each channel has a title. The red square and letter 'C' in the top right corner of each channel display indicates that the channel is in Continuous recording mode. Control Bar All menus can be controlled with the Control bar, using either the front panel buttons or a mouse (not included). Figure 2-7 Control Bar Note This User Guide contains instructions for using the front panel controls for configuration and operation, unless otherwise specified. Most actions can also be done using the remote control and a mouse (not included). Document 800-06847 Rev B 29 08/10 Installation Live Display Configuring the Screen Division 1. Navigate to DISPLAY in the Control bar, then click . The Display popup menu appears. Figure 2-8 Display Popup Menu 2. Select the screen divisi...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :