Évaluations - 4, GPA: 3.5 ( )

Fabricant : Epson Taille : 638.28 kb Nom Fichier : deca2e12-f623-4454-81d9-a90d48721245.pdf Langue d'enseignement:

Set up event types and associated responses. Setup Menu... > Event > ... Set up recording parameters and schedule. Setup Menu... > Record > ... Connecting the remote control and DVR The remote control and DVR can be assigned an ID, because the ID of each DVR in the network must be unique. The DVR will then only respond to the remote control with the matching ID. . If the system ID in the DVR is 0, it will respond to the remote control regardless of the remote’s ID. . If the system ID in the DVR is not 0, you must set the ID of the remote control identically. Step Action Menu path 1 Set DVR system ID. Setup Menu... > System > Information Match remote control to system ID by pressing ID button on remote control. Select relevant number on remote control. DTR-60XX Getting started (continued) Switching on the DVR Requirement: . The start-up preparations are complete. Step Action Plug in DVR mains plug. Switch on monitor. Result: System starts up automatically and is ready to use. Switching off the DVR Requirement: . You have accessed the Setup menu. Step Action Menu path Shut down the system. Setup Menu... > System > Shutdown... Result: System shuts down automatically. After shutdown, disconnect the mains plug. DTR-60XX Administration Saving your system setup You can save your DVR’s setup data, including its network configuration. Requirement: . USB memory stick Step Action Menu path Insert a USB memory stick into one of the USB ports. Setup Menu... > System > Information > Export your setup. Setup > Export... Specify a file name. Export your setup. Export Loading your system setup You can load your stored DVR system setup with or without its network configuration. Requirement: . USB memory stick with stored setup Step Action Menu path Insert a USB memory stick into one of the USB ports. Setup Menu... > System > Information > Import your setup. Setup > Import... Select the file name and, where appropriate, the network configuration. Import your setup. Import Deleting recordings You can only delete all your recordings together. It is not possible to delete recordings from a specific time period. Step Action Menu path Setup Menu... > System > Information > Clear All Data... 1 Delete all recordings. or Setup Menu... > System > Storage > Information > Information > In Use > Clear DTR-60XX Administration (continued) Downloading software updates You can download software updates for your DVR from a USB memory stick. Requirement: . USB memory stick with latest software release Step Action Menu path Insert a USB memory stick into one of the USB ports. Start update. Setup Menu... > System > Information > Upgrade... Install new release. Hiding from specific users You can hide video images and camera data according to the preset user rights. Step Action Menu path 1 Set camera Covert mode. Setup Menu... > Devices > Camera > Settings Cancel ‘Covert Camera View' access for Setup Menu... > System > User specific users (groups). Restoring factory defaults Before restoring the factory defaults, you should export your current system settings in case you need to re- import them later. (see Saving your system setup and Loading your system setup) Step Action 1 Shut down the system. Disconnect the mains plug. Push a paper clip into the Reset button (on the rear of the DVR) and hold it there. Plug in the mains plug. Wait for all the LEDs to flash 5 times (about 30 seconds). Withdraw the paper clip. DTR-60XX Administration (continued) Mirroring of hard disks Mirroring of hard disks prevents the loss of records in the event of a hard disk defect. Requirements: . The Digital Video Recorder has at least 2 or hard disks installed . The destination hard disk is identical to the source hard disk in type and memory capacity . The source-hard disk and the destination hard disk are not used for archiving records. Step Action Menu path Setup Menu... > System > Storage> Formatting the source hard disk for recording. Information > Format > Record Setup Menu... > System > Storage> Select the source hard disk. Information > Mirror 1/2 > Source Setup Menu... > System > Storage> Select the destination hard disk. Information > Mirror 1/2 > Dest. Start Mirroring. Start... Results: . The source hard disk and destination hard disk are synchronised (approx. 40 minutes for 10 GB). . All data on the destination hard disk are deleted. . All records are written to both hard disks. Interrupting Mirroring. Stop... Results: . The status of the destination hard is set to: Don't use . The hard disk can now only be used for searching for records. . If the hard disk is to be used for records or archiving, Setup Menu... > System > Storage> it must be formatted. Information > Format > Format Continuing Mirroring - see Starting Mirroring. Start... DTR-60XX Administration (continued) Determining the memory requirement of a recording The amount of memory recorded video sequences will take up depends on the following factors: Picture quality number of images per second dur...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :