Évaluations - 2, GPA: 4
(
)
)
|
Facilité d'utilisation
•The “CINEMA” mode is effective only when the VIDEO/DSC Switch is set to “VIDEO” (GR-DVL817 only). SQUEEZE For playback on TVs with an aspect ratio of 16:9. Naturally expands the image to fit the screen without distortion. appears. When using this mode, refer to your wide-screen TV’s instruction manual. During playback/ recording on 4:3 TVs/LCD monitor/viewfinder, the image is elongated vertically. •The “SQUEEZE” mode is effective only when the VIDEO/DSC Switch is set to “VIDEO” (GR-DVL817 only). WIND CUT OFF Disengages the function which cuts down on noise created by wind. ON Helps cut down on noise created by wind. “ ” appears. The quality of the sound will change. This is normal. Even though not heard while shooting, shutter sound is recorded on the tape. SYSTEM BEEP OFF Even though not heard while shooting, shutter sound is recorded on the tape. BEEP The beep sounds when the power is turned on or off, and at the beginning and end of recording. Also to activate the shutter sound effect ( pg. 26, 42). MELODY Instead of a beep, a melody sounds when any operation is performed. It also activates the shutter sound effect ( pg. 26, 42). TALLY OFF The tally lamp remains off at all times. ONThe tally lamp comes on to signal the start of recording. ID NUMBER (GR-DVL517/ DVL515/ DVL317 only) This number is necessary when connecting the camcorder to a device such as a computer using the J terminal (JLIP). The numbers range from 01 to 99. Factory setting is 06. : Factory-preset NOTES: . The“ MANUAL”settings are effective only when the Power Switch is set to“ ”. . “ SYSTEM”functions which are set when the Power Switch is set to“ ”are also applied when the Power Switch is set to“ ”( pg. 50). EN49EN49 SYSTEM DEMO MODE OFF Automatic demonstration will not take place. ON Demonstrates certain functions such as Program AE with special effects, etc., and can be used to confirm how these functions operate. When “DEMO MODE” is set to “ON” and the Menu Screen is closed, demonstration starts. Performing any operation during the demonstration stops the demonstration temporarily. If no operation is performed for more than 1 minute after that, the demonstration will resume. NOTES: . If a tape is in the camcorder, the demonstration cannot be turned on. . “DEMO MODE” remains “ON” even if the camcorder power is turned off. . If “DEMO MODE” remains “ON”, some functions will not be available. After viewing demo, set to “OFF”. SIDE LED ON The Side LED indicator ( p. 78, 79) lights on the camcorder when the Power Switch is set to “ ” or “ ”. OFF CAM RESET CANCEL Does not reset all settings to the factory-preset. EXECUTE Resets all settings to the factory-preset. DISPLAY ON SCREEN LCD Keeps the camcorder’s display (except the date, time and time code) from appearing on the connected TV screen. LCD/TV Makes the camcorder’s display appear on screen when the camcorder is connected to a TV. DATE/ TIME OFF The date/time does not appear. AUTO Displays the date/time for approx. 5 seconds in the following cases: •When the Power Switch is set from “OFF” to “ ” or “ ”. •When video playback starts. The camcorder displays the date/time when scenes are recorded. •When the date is changed during video playback. ON The date/time is always displayed. TIME CODE OFF Time code is not displayed. ON Time code is displayed on the camcorder and on the connected TV. Frame numbers are not displayed during recording. CLOCK ADJ. Allows you to set the current date and time ( pg. 11). (GR-DVL817 only) DSCQUALITY Allows you to set the Picture Quality mode (FINE and STANDARD) depending on your preference ( pg. 14). REC SELECT When Snapshot recording is performed with the VIDEO/DSC Switch set to “VIDEO”, still images are recorded only onto the tape. / When Snapshot recording is performed with the VIDEO/DSC Switch set to “VIDEO”, still images are recorded not only onto the tape but also in the memory card. : Factory-preset NOTES: . “ SYSTEM”and“ DISPLAY”functions which are set when the Power Switch is set to“ ”are also applied when the Power Switch is set to“ ”( pg. 50).“CLOCK ADJ.”only appears when the Power Switch is set to “ ”. . The“ DISPLAY”settings are effective even when the Power Switch is set to“ ”. . The“ON SCREEN”setting can also be changed by pressing theDISPLAYButton on the remote control (provided with GR-DVL817 only) ( pg. 23, 52, 62). 50EN USING MENUS FOR DETAILED ADJUSTMENT (cont.) MENU/BRIGHT Wheel Lock Button Recording Start/Stop Button Power Switch Display MDOESOUND MDOE12BI T ROSYNCHODE REC MCOPY STEREO SOUND 1 SP OFF NRETURO.O RE NEON SC LCD / TV UAOTIME TDATE / T I ME CODE FFONRETURBEEP MELODY NOTALLY ID N MUBER 60 DEMO M.ODE NOSI DE LED NOCAM ERSET NRETURMSYSTEAYDI SPLYMEMORVI DEO SOUND MODE MODE MODE 12BI T SYNC ROH REC END COPY MSYSTEAYDI SPLYMEMORVI DEO INDEX TCPROTEDELEETDPOF ATFORMEND *Actual menus differ by model and may appear differently from these illustrations. Some menu items may not be unavailable on your model. For Playback Menu The f...
Ce manuel est également adapté pour les modèles :Vidéo - GR-DVL317 (3.18 mb)