Log:
Évaluations - 1, GPA: 4 ( )

Instructions Vulcan-Hart, Modèle IR1

Fabricant : Vulcan-Hart
Taille : 10.64 mb
Nom Fichier :
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


Loosen the mounting screw in each burner(GHCB40 only). knob. NOTE: The GHIR44 manifold cover assembly has 2. Remove the burner knob. a chain to protect switch wiring. 2. Loosen the mounting screw in each burner knob. 3. Remove the two burner knobs from the broiler. 4. Remove the two screws from the manifold cover assembly. 5. Remove the manifold cover assembly from the broiler. 6. Reverse the procedure to install. Burner Knob Cover Plate [ HCB2(B), IR1 and IR2(B)] WARNING: SHUT OFF THE GAS BEFORE SERVICING. 3.Remove two screws from the burner knob cover plate and the broiler. 4.Slide the burner knob cover plate out and remove it from the broiler. 5.Reverse the procedure to install. – 7 – Control Panel Cover (GHCB40) 1. Remove the manifold cover assembly as outlined in Manifold Cover Assembly. 2.Loosen the retaining screw and remove the burner knob from the broiler. 3.Pull the thermostat knob to remove it from the broiler. 4. Remove the bolt and the control panel cover from the broiler. 5. Reverse the procedure to install. Lower Front Panel (GHCB40) 1. Grasp the bottom of the lower front panel. 2. Pull the lower front panel out to remove it from the broiler. 3. Reverse the procedure to install. Oven Burner Cover (GHCB40) 1. Remove the lower front panel as outlined in Covers, Panels and Handles. 2.Remove the screw from the oven burner cover. 3.Remove the oven burner cover from the broiler. 4.Reverse the procedure to install. – 8 – Oven Bottom Assembly (GHCB40) WARNING: SHUT OFF THE GAS BEFORE SERVICING. WARNING: ALL GAS JOINTS DISTURBED DURING SERVICING MUST BE CHECKED FOR LEAKS. CHECK WITH SOAP AND WATER SOLUTION (BUBBLES). DO NOT USE AN OPEN FLAME. 1. Remove the lower front panel as outlined in Covers, Panels and Handles. 2. Open oven door. 3. Remove rack if necessary. 7. Remove the oven bottom baffle from the broiler. 4.Remove the two screws and brass bushings from the broiler. 5.Loosen the two bolts on the retainer brackets. 6.Remove the oven bottom assembly from the broiler. 8. Remove the oven insulation sheet. 9. Remove the oven bottom tray. 10. Reverse the procedure to install. – 9 – Augratin Oven Bottom Assembly (GHCB40) WARNING: ALL GAS JOINTS DISTURED DURING SERVICING MUST BE CHECKED FOR LEAKS. CHECK WITH SOAP AND WATER SOLUTION (BUBBLES). DO NOT USE AN OPEN FLAME. 1. Remove the four screws and brass bushings from the broiler. 3.Remove the augratin oven bottom baffle from the broiler. 4.Reverse the procedure to install. NOTE: When installing bottom assembly, angle metal should be at the rear of the oven. Oven Door Handle (GHCB40) 1. Remove the caps from the oven door. 2. Slide the augratin oven bottom assembly from the broiler. – 10 – 2. Remove two screws and the oven door handle from the oven door. 3. Reverse the procedure to install. BROILER GRID TRAY (ALL MODELS) WARNING: SHUT OFF THE GAS BEFORE SERVICING. 1. Allow the broiler grids to cool. GRID CARRIAGE ASSEMBLY (ALL MODELS) WARNING: SHUT OFF THE GAS BEFORE SERVICING. WARNING: ALL GA...

Ce manuel est également adapté pour les modèles :
Chauffe-eau - GHCB40 (10.64 mb)
Chauffe-eau - GHCB44 (10.64 mb)
Chauffe-eau - GHIR44 (10.64 mb)
Chauffe-eau - GHMCB44 (10.64 mb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories