Évaluations - 1, GPA: 5
(
)
)
|
Facilité d'utilisation
2. With 1/4" hex driver or socket, loosen the thermostat screw. Carefully slide the thermostat sensing bulb out of the retaining clamp (see Figure 36, page 29). Note: Do not remove the screw. Make sure you tighten the screw after removing the thermostat sensing bulb. IMPORTANT: Do not force or bend the ther- Gas Valve Assembly Mounting Bracket Thermostat Sensing Bulb Figure 34 - Location of Gas Valve Assembly and Thermostat Sensing Bulb mostat sensing bulb or capillary. Figure 35 - Adhesive-backed Mounting Clip 113101-01A OPTIONAL POSITIONING OF THERMOSTAT SENSING BULB Continued 3. The thermostat sensing bulb may be located to the lower right front side of fireplace. Determine location of sensing bulb, but do not mount sensing bulb until step 4. If you have a masonry fireplace, see Figure 37 for location. If you have a factory-built metal fireplace, see Figure 38 for location. If your fireplace has glass doors, position sensing bulb directly behind door gap on right bottom side (see Figure 39). 4. The mounting clip must be a minimum of 3" from bottom of fireplace to prevent crimping of capillary. Once you have decided on a location, clean the area thoroughly. Remove the paper backing from the adhesive on back of mounting clip. Press the clip into the new location so that the thermostat sensing bulb will be positioned vertically with the capillary at the bottom (see Figure 40). Slide the thermostat sensing bulb into the clip. IMPORTANT: Do not crimp capillary. Thermostat Screw Capillary Retaining Clamp Thermostat Sensing Bulb Figure 36 - Removing ThermostatSensing Bulb Thermostat Sensing Bulb Adhesive-backed Mounting Clip Figure 37 - Locating Thermostat Sensing Bulb on Masonry Fireplace Thermostat Sensing Bulb Adhesive-backed Mounting Clip Figure 38 - Locating Thermostat Sensing Bulb on Factory-built Metal Fireplace Thermostat Sensing Bulb Adhesive- backed Mounting Clip ........ QQQQ ........ QQQQ ........ QQQ Glass Doors Figure 39 - Installing Thermostat Sensing Bulb behind Glass Doors Capillary Thermostat Sensing Bulb Adhesive- backed Mounting Clip Do Not Crimp Capillary Figure 40 - Positioning the Thermostat Sensing Bulb in the Vertical Position with the Capillary at the Bottom 113101-01A SPECIFICATIONS 18" Model 18" Model 24" Model 24" Model (CGS2718PA) (CLD3018PTA) (CGS3124PA) (CLD3924PTB) (SGS3124PA) Btu (Variable) 16,000/27,000 18,000/30,000 16,000/31,500 20,000/39,000 Type Gas Propane/LP Propane/LP Propane/LP Propane/LP Ignition Piezo Piezo Piezo Piezo Manifold Pressure 8.0" W.C. 8.0" W.C. 8.0" W.C. 8.0" W.C. Inlet Gas Pressure (in. of water) Maximum 14" 14" 14" 14" Minimum* 11" 11" 11" 11" Shipping Weight 27 lbs. 27 lbs. 29lbs. 27 lbs. * For the purpose of input adjustment 18" Model 18" Model 24" Model 24" Model (CGS2718NA) (CLD3018NTA) (CGS3124NA) (CLD3924NTB) (SGS3124NA) Btu (Variable) 16,000/27,000 18,000/30,000 16,000/31,500 20,000/39,000 Type Gas Natural Gas Natural Gas Natural Gas Natural Gas Ignition Piezo Piezo Piezo Piezo Manifold Pressure 3.5" W.C. 3.5" W.C. 3.5" W.C. 3.5" W.C. Inlet Gas Pressure (in. of water) Maximum 10.5" 10.5" 10.5" 10.5" Minimum* 5" 5" 5" 5" Shipping Weight 27 lbs. 27 lbs. 29 lbs. 29lbs * For the purpose of input adjustment ACCESSORIES Purchase these fireplace accessories from your local dealer. If they can not supply these accessories, either contact your nearest Parts Central or call DESA Heating Products’ Sales Department at 1-866-672-6040 for information. You can also write to the address listed on the back page FIREPLACE HOOD of this manual. Black - GA6050 Brass - GA6052 Antique Brass - GA6053 For all models. Helps deflect heat away from mantel or wall above fireplace. LAVA ROCK - GA6060 EQUIPMENT SHUTOFF VALVE (Not Shown) GA5010 For all models. Order when additional rock is desired. (2 lb. bag). For all models. Equipment shutoff valve with 1/8" NPT tap. Fits 1/2" NPT pipe. INFORMATION VIDEO - 108917-01 DAMPER CLAMP - GA6080 For all models. A care and maintenance (Not Shown) video is available by calling 1-866-672-6040. You may also email your request to For variably-controlled models. Permanently productsupport@desaint.com. opens chimney flue damper for vented operation. 113101-01A PARTS CENTRAL These Parts Centrals are privately owned businesses. They have agreed to support our customer’s needs by providing original replacement parts and accessories. Tool & Equipment Company 1348 Dixwell Avenue Hamden, CT 06514-0322 1-800-397-7553 203-248-7553 Parts Department Portable Heater Parts 342 N. County Rd. 400 East Valparaiso, IN 46383-9704 All States 219-462-7441 1-888-619-7060 sales@portableheaterparts.com techservice@portableheaterparts.com FBD 1349 Adams Street Bowling Green, KY 42103-3414 270-846-1199 1-800-654-8534 Fax: 1-800-846-0090 franktalk@aol.com Master Parts Dist. 1251 Mound Ave NW Grand Rapids, MI 49504-2672 616-791-0505 1-800-446-1446 Fax: 616-791-8270 Washer Equipment Co. 1715 Main Stree...
Ce manuel est également adapté pour les modèles :Chauffe-eau - CGS2718NA (1.3 mb)
Chauffe-eau - CGS2718PA (1.3 mb)
Chauffe-eau - CGS2718PA, CGS2718NA, CGS3124PA, CGS3124NA, SGS3124PA, SGS3124NA, CLD3018PTA, CLD3018NTA, CLD3924PTB (1.3 mb)