Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
¦ The continuous-flow heater may only be connected and put into operation by a qualified professional. ¦ Repairs may only be undertaken by a suitably qualified specialist to avoid potential sources of danger. ¦ The continuous-flow heater may only be installed in a frost-free room. ¦ Persons (including children) with diminished bodily, sensory or mental perception, or those who lack knowledge or experience should not operate the appliance, unless they are monitored or have received instruction concerning use of the appliance by persons responsible for their safety. ¦ Keep children away from the appliance. Please monitor children to ensure that they do not play with the appliance. ¦ The mixer and the warm water pipe may be hot . ¦ Please switch off all fuses immediately if a malfunction occurs. Immediately shut off the cold water supply to the appliance should it leak. The malfunction can only be repaired by a specialist or an authorised service agent. Your new appliance The electronically regulated flow-through heater warms the water while it flows through the unit. How to operate the continuous-flow heater The warm water temperature can be continuously adjusted on the electronically regulated flow-through heater: Washbasin Shower With the use of a thermostat battery, the following settings are recommended for high temperatures or large quantities of water, for example: Dish washing Cleaning ¦ Turn on the hot-water tap. The continuous-flow heater switches on and heats the water when the hot-water tap is turned on. It switches off again when the tap is turned off. Changing the supply water temperature correspondingly changes the outgoing water temperature. Increasing the water temperature If a higher temperature for a completely opened warm water tap is not achieved, more water flows than the flow-through heater can warm as a result its performance capabilities. In this case, the warm water tap must be closed somewhat. Decreasing the water temperature Startup after a water cutoff ¦ Switch off the appliance (unscrew the fuse in the house electrical installation). ¦ Turn on the hot-water tap until the air is purged from the pipe. ¦ Switch the fuse back on again. The appliance is ready for operation. Saving energy ¦ Set the desired warm water temperature directly on the flow-through heater. Mixing with cold water at the armature for water that is too hot consumes unnecessarily water and energy. At approx. 40 °C (temperature selection position ) the unit operates most economically. 10 en Cleaning Simply wipe the appliance with a damp cloth. Do not use intensive or abrasive cleaning agents. Customer Service We ask you to always provide the E-No. and the FD-No. of your appliance when calling in a customer service engineer. You will find the numbers on the inner side of the fold up operating panel on the continuous-flow heater. A fault, what to do? If your appliance does not operate as required, it is often due to a very minor problem. Please check whethe...
Ce manuel est également adapté pour les modèles :Chauffe-eau - DE21401/01 (1.96 mb)
Chauffe-eau - DE21401/02 (1.96 mb)
Chauffe-eau - DE21401/03 (1.96 mb)
Chauffe-eau - DE24401/01 (1.96 mb)