Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
¦ Install a suitable overflow mixer: BZ12410 Wall mixing tap with tub outlet, shower hose and hand-held shower head: or BZ11110 Mixing tap with visible cross-connected body for mounting on vertical surface and hand-held shower head. ¦ The tap outlet must always remain free as it is used for ventilation. Do not use perlators/diffusers. ¦ Install a check valve in the cold water supply. IV. Startup Important: Connect the water supply connections and then the electrical supply connections as otherwise the appliance will be damaged. ¦ Fill and rinse the tank until the water flows without air bubbles. ¦ Plug in the main plug. Display 1 (Fig. E) lights up as long as the appliance heats. ¦ Expansion water should drip from the outlet of the safety valve (pressurized operation) or from the mixer (unpressurized operation) during heating. ¦ Monitor during the first heat up operation. ¦ Tip: Water loss and scaling are at their lowest at a water temperature of approx. 55°C. ¦ After installation, hand over the operating instructions to the user and explain how the appliance operates. V. Appliance switch off ¦ If the water tank is not in continuous use it can be switched off by setting the rotary knob to “0” (off). ¦ If the appliance is switched off (position 0) and/or the electrical supply is disconnected, the tank must be drained fully by our customer service department or an authorised specialist in order to avoid frost damage. Draining (Fig. C) ¦ Disconnect the appliance from the electrical supply. ¦ Close the stop valve (6). ¦ Open a warm water tap (7). ¦ Connect a draining hose to the drain valve (8) or safety valve (1). Open the valve and drain the water. Operating instructions Safety instructions ¦ Use only in accordance with these instructions. ¦ The appliance may only be installed and put into operation by a specialist or an authorised service agent. ¦ With pressurized operation the safety valve must be operated regularly every month to verify its function and to descale the valve (Fig. D). Open the lever until water emerges. Close the lever again (operating state). ¦ Contact customer service if the safety valve does not work. ¦ If the water tank has not been used for more than three months it must be thoroughly rinsed out until the water flows without air bubbles. ¦ The appliance and the respective water pipes and components may only be installed in a frost-free room. ¦ Please inform children that the water outlet can be hot! ¦ Persons (including children) with diminished bodily, sensory or mental perception, or those who lack knowledge or experience should not operate the appliance, unless they are monitored or have received instruction concerning use of the appliance by persons responsible for their safety. ¦ Please monitor children to ensure that they do not play with the appliance. Operating elements and displays (Fig. E) 1display The display lights up as long as the appliance is heating. The display switches off as soon as the set temperature is ...
Ce manuel est également adapté pour les modèles :Chauffe-eau - DG10036P/01 (220.52 kb)
Chauffe-eau - DG10036R/01 (220.52 kb)
Chauffe-eau - DG30036E/01 (220.52 kb)
Chauffe-eau - DG30036P/01 (220.52 kb)