Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
¦ The dismounted appliance must be stored in a frost-free area (residual water) and may not be subjected to frost. ¦ This appliance can be used by children aged 8 years and older as well as by persons with diminished bodily, sensory or mental perception, or those who lack knowledge or experience, if they are monitored or have received instruction concerning use and comprehend the possible dangers that can result. Children may not play with the appliance. Cleaning and maintenance by the user may not be performed by unsupervised children. ¦ Keep children away from the appliance. ¦ Please monitor children to ensure that they do not play with the appliance. ¦ The warm water pipe may be hot. Please inform and instruct children appropriately. ¦ Please switch off all fuses immediately with a malfunction. Immediately shut off the cold water supply to the appliance should it leak. The malfunction can only be repaired by factory service or an authorised service agent. ¦ Do not use aggressive or abrasive cleaning detergents! ¦ Do not use a steam cleaner. ¦ Please observe the manufacturers warnings when descaling. 14 15 en Congratulations on purchasing this Siemens appliance. You have acquired a top-quality product, which will give you a lot of enjoyment. Please read this installation and operating instruction manual carefully, then act accordingly! Store for future reference. Installation (for the qualified professional) Unpacking ¦ Inspect the new appliance for transport damage! ¦ Please dispose of the packaging, and if applicable, the old appliance in an environmentally-friendly manner. Scope of delivery 1 Appliance with operating panel 2 Installation bracket 3 Mounting (2 screws, 2 wall plugs) 4 Documentation 5 DO05755 and DO3175D5 only: Single-lever mixer undersink 6 DO05755K only: Kitchen tap undersink 7 DO05855 and DO3185D5 only: Oversink fitting Product description The small water heater is only suitable for open (unpressurized) installation. It heats and stores drinking water up to approx. 85 °C. Different temperature levels can be selected with the temperature selector knob. The appliance may not be operated with pre-heated water, as otherwise the safety temperature limitation will trip. The appliance is connected using the mains plug. This installation and operating instruction manual describes various appliance types: – Undersink appliances with additional drip stop function and pressure stop DO05705, DO05755, DO05755K, DO3170D5, DO3175D5 and DO05705CH – Oversink appliances DO05805, DO05855, DO3185D5 and DO05805CH Preparations for installation ¦ Shut off the water supply before connecting the appliance. Do n o t insert the mains plug. ¦ Remove the installation bracket on the appliance and break off the retaining rings (A). ¦ Fix the connection cable to the rear of the appliance to suit the required length (B). DO05705 DO05755 DO05755K DO3170D5 DO3175D5 DO05705CH DO05805 DO05855 DO3185D5 DO05805CH 43,5 43,5 27 24 1 2 3 4 1 5 6 7 B A 16 en Wall mounting Undersink appliances DO05705, DO05755, DO05755K, DO3170D5, DO3175D5 and DO05705CH ¦ Align the appliance on the wall and use the three indents (top, left and right on the appliance) to apply markings (A). ¦ Connect the markings by a pattern of crossed lines with a spirit level (B1 and B2). ¦ Place the installation bracket on top at the point of intersection of the drawn lines and mark the position for the holes (C). ¦ Drill the holes and insert wall plugs (D1). ¦ Attach the installation bracket (notch at top) to the wall using the screws (D2). ¦ Suspend the appliance in the installation bracket (D3). Exchanging appliances ¦ When replacing an old Siemens small water heater with this new appliance, the existing drill holes with wall plugs can be used. Please note that the new appliance is approx. 2 cm higher. If the new appliance is to be flush at the top like the old appliance (E1): ¦ Attach the new installation bracket to the wall with the notches at the top. If the new appliance is to be flush at the bottom like the old appliance (E2): ¦ Turn the installation bracket around and attach to the wall with the notches at the bottom. D1 D2 D3 C 2x B2 B1 3x A 180° E1 E2 17 en Oversink appliances DO05805, DO05855, DO3185D5 and DO05805CH ¦ Align the appliance on the wall and use the three indents (top, left and right on the appliance) to apply markings (F). ¦ Connect the markings to a pattern of crossed lines with a spirit level (G1 and G2). ¦ Place the installation bracket on top at the point of intersection of the drawn lines and mark the position for the holes (H). ¦ Drill the holes and insert wall plugs (I1). ¦ Attach the installation bracket (notch at top) to the wall using the screws (I2). Exchanging appliances When replacing an old Siemens small water heater with this new appliance, the existing drill holes with wall plugs can be used. Please note that the new appliance is approx. 2 cm higher. ¦ Turn the installation bracket around and attach to the wall with th...
Ce manuel est également adapté pour les modèles :Chauffe-eau - DO3175D5/01 (11.18 mb)
Chauffe-eau - DO3185D5/01 (11.18 mb)