Évaluations - 3, GPA: 4
(
)
)
|
Facilité d'utilisation
At all times the correct method for handling heavy objects should be strictly observed. GENERAL HANDLING GUIDELINES: • Lift only a manageable weight, or ask for help. • When lifting, bend the knees, and keep the back straight and feet apart. • Do not lift and twist at the same time. • Lift and carry items close to the body. • Wear protective clothing and gloves to protect from any sharp edges. PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION. THESE INSTRUCTIONS ARE APPLICABLE TO THE WORCESTER APPLIANCE MODEL(S) STATED ON THE FRONT COVER OF THIS MANUAL ONLY AND MUST NOT BE USED WITH ANY OTHER MAKE OR MODEL OF APPLIANCE. THE INSTRUCTIONS APPLY IN THE UK ONLY AND MUST BE FOLLOWED EXCEPT FOR ANY STATUTORY OBLIGATION. THIS APPLIANCE MUST BE INSTALLED BY A COMPETENT PERSON. FAILURE TO INSTALL CORRECTLY COULD LEAD TO PROSECUTION. COMPLYING WITH THE BUILDING REGULATIONS: This heating appliance forms part of the controlled services for the building. It is law that all controlled services for buildings must comply with building regulations. You must be able to satisfy your Local Authority Building Control Body (LABC) that the work carried out concerning the installation and commissioning of this heating appliance has been carried out to a satisfactory standard. OFTEC operate a competent persons scheme and registered installers are able to certify that their work complies with building regulations. Under the scheme; • OFTEC must be informed about every installation. • OFTEC will issue a building regulations compliance certificate to the householder and will notify the LABC. OFTEC provide controlled document forms CD10 and CD11 for use during installation and commissioning respectively. Other organisations operate self-certification schemes e.g. NAPIT and BESCA Ltd. and it may be possible for installers who are members of these organisations to self certify their work. Alternatively you must submit a building control notice to the LABC before installing any boiler. The LABC will then arrange regular inspection visits during the work to ensure that the installation complies with the regulations. IF YOU ARE IN ANY DOUBT CONTACT THE WORCESTER TECHNICAL HELPLINE. DISTANCE LEARNING AND TRAINING COURSES ARE AVAILABLE FROM WORCESTER. PLEASE LEAVE THESE INSTRUCTIONS WITH THE COMPLETED COMMISSIONING FORM AND THE USER MANUAL WITH THE OWNER OR WITH THE APPLIANCE AFTER INSTALLATION OR SERVICING. THE SERVICE INTERVAL RECORD CAN BE FOUND ON THE BACK PAGE OF THIS MANUAL. ABBREVIATIONS USED IN THIS MANUAL: O Diameter CH Central Heating DHW Domestic Hot Water TRV Thermostatic Radiator Valve IP Ingress Protection CF Conventional flue BF Balanced flue N/A Not allowed SEDBUK Seasonal Efficiency of Domestic Boilers in the United Kingdom OFTEC Oil Firing Technical Association for the Petrolium Industry IEE Institute of Electrical Engineers LABC Local Authority Building Control Body STORE THE APPLIANCE IN A DRY AREA PRIOR TO INSTALLATION. Check List Hardware/Literature pack Item Qty Greenstar Heatslave External Installation/Servicing Instructions.........1 Users Instructions............................................................................................1 Hardware Pack.................................................................................................1 100mm O Services Duct................................................................................1 Condensate Trap Kit........................................................................................1 Warranty Return Envelope.............................................................................1 Cabinet Key.......................................................................................................1 1 INSTALLATION & SERVICING INSTRUCTIONS FOR WORCESTER GREENSTAR HEATSLAVE EXTERNAL 12/18-18/25-25/32 INSTALLATION & 8 716 113 389b (09/07) SERVICING INSTRUCTIONS CONTENTS SAFETY & REGULATIONS IMPORTANT INFORMATION AND SYMBOLS 1 SAFETY & REGULATIONS APPLIANCEINFORMATION PRE - INSTALLATIONINSTALLATIONCOMMISSIONINGSERVICING& SPARES FAULT FINDING& DIAGRAMS SAFETY PRECAUTIONS AND INSTALLATION REGULATIONS 3 APPLIANCE INFORMATION GENERAL INFORMATION 4 TECHNICAL DATA 5 LAYOUT & COMPONENTS 6 PRE-INSTALLATION CLEANING PRIMARY SYSTEMS 7 MAINS SUPPLIES 8 OIL SUPPLY 9 WATER SYSTEMS & PIPEWORK 10-11 CONDENSATE & PRESSURE RELIEF PIPEWORK 12 BOILER LOCATION & CLEARANCES 13 CABINET MOUNTED LOW LEVEL FLUE TERMINAL POSITIONS 14 HIGH LEVEL FLUE TERMINAL POSITIONS 15 EXTERNAL OILFIT BALANCED FLUE OPTIONS 16 CABINET MOUNTED HORIZONTAL BALANCED FLUE OPTIONS 17 INSTALLATION UNPACKING THE BOILER 18 PIPEWORK & FLUE POSITIONS 19 BOILER INSTALLATION 20 FLUE INSTALLATION 21 COMBUSTION CHAMBER 22 PIPEWORK CONNECTIONS 23-24 OIL BURNER AND PUMP 25 REFITTING COMPONENTS 26 ELECTRICS 27-28 COMMISSIONING PRE-COMMISSIONING CHECKS - APPLIANCE 29 FILLING THE SYSTEM 30 STARTING THE APPLIANCE 31-34 WATER TREATMENT 35 FINISHING COMMISSIONING - APPLIANCE 36 SERVICING &...
Ce manuel est également adapté pour les modèles :Chauffe-eau - 18/25 (4.57 mb)
Chauffe-eau - 25/32kW (4.57 mb)