Évaluations - , GPA:
(
)
)
Fabricant : Culligan
Taille : 624.74 kb
Nom Fichier : 4681cc81-969e-4159-b435-f0a4240062d2.pdf
Langue d'enseignement: 
Le document est chargé, s'il vous plaît patienter
 |
Le document est chargé, s'il vous plaît patienter
Facilité d'utilisation
Culligan recommends that you have your water supply tested to determine these needs before purchasing a water treatment unit. Culligan knows the more informed you are about your water treatment system, the more confident you will be about its performance. It’s because of this and more than seventy years of commitment to our customers that Culligan is providing this Performance Data Sheet to its customers. Manufacturer Culligan International Company 9 99 W. Higgins Rd., Suite 1100, Rosemont, IL 60018 USA 1-800-CULLIGAN or 1-847-4 0-2800 Substance Reduction This system has been tested according to WQA S-200 for the reduction of the substances listed below. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in WQA S-200. While testing was performed under standard laboratory conditions, actual performance may vary. Substance USEPA SDWA* SMCL Average Test Influent Average Test Effluent Concentration Level Concentration Level Chlorine Taste & Odor N/A 2.11 mg/L 0.02 mg/L * United States Environmental Protection Agency Safe Drinking Water Act. Capacity: 180,000 gallons Flow Rate: 6.0 gpm Rated Pressure Drop:6.0 gpm @ 6 psi Operating Conditions Water Pressure Limits: 20 - 120 psi (140 - 860 kpa) Canada: 20 - 90 psi (140 - 620 kpa) Temperature Limits: - 120° F (1 - 50° C) Electrical Characteristics: 120V/ 60 Hz, 45 Watts The Medallist Plus Cullar® Filter is tested and certified by WQA against WQA S-200 for neutralization up to 180,000 gallons as verified and substantiated by test data. Performance Indicator: If water flow decreases or a noticeable taste change occurs, the filter should be backwashed. If conditions do not improve, contact your local Culligan Man. He can determine if your filter requires servicing. Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Regeneration Frequency: Replacement frequency will vary with water conditions. Refer to the Installation and Operation Instructions, Parts List and Printed Warranties for more specific product information. To avoid contamination from improper handling and installation, your system should only be installed and serviced by your Culligan Man. Performance will vary based on local water conditions. The substances reduced by this product are not necessarily in your water. Buyer Signature _________________________________________________ Date ________________ Seller Signature _________________________________________________ Date ________________ Culligan Medallist Series® 8” and 10” With Cullneu® Filter Important Notice — Read this data sheet and compare the capabilities of the unit to your actual water treatment needs. Culligan recommends that you have your water supply tested to determine these needs before purchasing a water treatment unit. Culligan knows the more informed you are about your water treatment system, the more confident you will be about its performance. It’s because of this and more than seventy years of commitment to our customers that Culligan is providing this Performance Data Sheet to its customers. Manufacturer Culligan International Company 9 99 W. Higgins Rd., Suite 1100, Rosemont, IL 60018 USA 1-800-CULLIGAN or 1-847-4 0-2800 Substance Reduction Substance USEPA SDWA* SMCL Average Test Influent Average Test Effluent Concentration Level Concentration Level pH 6.5 - 8.5 4. mg/L 8.0 mg/L * United States Environmental Protection Agency Safe Drinking Water Act. Capacity: 1 ,500 gallons (8” Filter) 20,000 gallons (10” Filter) Flow Rate: 2.7 gpm (8” Filter) 4.0 gpm (10” Filter) Rated Pressure Drop:2.7 gpm @ psi (8” Filter) 4.0 gpm @ 4 psi (10” Filter) Operating Conditions Water Pressure Limits: 20 - 120 psi (140 - 860 kpa) Canada: 20 - 90 psi (140 - 620 kpa) Temperature Limits: - 120° F (1 - 50° C) Electrical Characteristics: 120V/ 60 Hz, 45 Watts Performance Indicator: If water flow decreases or a noticeable taste change occurs, the filter should be backwashed. If conditions do not improve, contact your local Culligan Man. He can determine if your filter requires servicing. Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Regeneration Frequency: Replacement frequency will vary with water conditions. Refer to the Installation and Operation Instructions, Parts List and Printed Warranties for more specific product information. To avoid contamination from improper handling and installation, your system should only be installed and serviced by your Culligan Man. Performance will vary based on local water conditions. The substances reduced by this product are not necessarily in your water. Buyer Signature _________________________________________________ Date ________________ Seller Signature _________________________________________________ Da...