Évaluations - 2, GPA: 4
(
)
)
|
Facilité d'utilisation
THE NF-SERIES GIVES YOU MORE 1. One control valve operates both tanks and provides better flow rates. 2. Takes less time and space to install. 3. Provides softened water 24 hours per day on demand with 1-1/2” flow meter. 4. Uses soft water to regenerate. 5. There are no time clocks to set or day pins to worry about. 6. Electricity is only used during regeneration. 7. Manufactured and tested accordingly to Water Quality AppLICATIONS Apartment Buildings Households Boiler Treatment Laundries Car Washes Motels and Hotels Clubs Nursing and Rest Homes Commercial Buildings Office Buildings Condominiums Restaurants Factories R.O. Pre-Treatment Hospitals Schools Association Voluntary Industry Standards. 1) The control valve and second tank adapter are solid brassassuring you durability and long life. 2) Two self cleaning teflon coated pistons control the regeneration and alternating from unit to unit with conditioned water. They are hydraulically balanced to equalize pressure on bothsides of the piston, allowing it to shift smoothly and quietlyregardless of water pressure. Large plastic spacers andrubber seals protect the pistons from sediment in water andimprove service flow rates. 3) The 1.5” meter allows for capacities from 625 to 53,125gallons between regenerations and will measure flow ratesaccurately between 1.5 and 75 gpm. The 1.5” low flow meter allows for capacities from 310 to 26,350 gallons between regenerations and will measure flow rates accurately between0.7 and 40 gpm. 4) The NF-SERIES timer doesn’t require a time of day settingsince it adjusts automatically to meet your needs. Regeneration can take place as often as every 90 minutes if needed. 5) The NF-SERIES has an adjustable cycle programmer. This allows you to efficiently monitor all regeneration cycles including backwash, brine and slow rinse, rapid rinse and brinetank refill. 6) In addition to regenerating with soft water, the NF-SERIES uses electricity only during regeneration, therefore poweroutages do not affect metering. A convenient cycle position readout dial indicates which unit is in service and the status of the other unit. It has no complicated interlock wiring andcosts less to install. A) Fiberglass and polyglass mineral tanks provide rust and cor- rosion free service for years. National Sanitation Foundation approved. B) 1.5” high flow hub & lateral distribution system for minimalpressure loss. C) Hi-Capacity Cation resin has uniform and stable resin beadsassuring long life and maximum soft water. D) Gravel underbedding assures full usage of mineral beds andallows for a smooth and constant water flow for service and regeneration. E) Safety brine valve acts as a secondary shut-off in case of a power failure during regeneration. F) High density polyethylene brine tank has exceptional envi- ronmental stress crack properties, eliminating cracking andminimizing bulging. G) Polypropylene salt grid allows insoluble materials to settle out. A B C D G F E NF-SERIES Specifications MODEL NAME RESIN CU. FT. CAPACITY SERVICE FLOW RATE CONT. 15 PSI FLOW RATE PEAK 25 PSI BACKWASH RATE GPM MINERAL TANKS (INCHES) BRINE TANK SIZE (INCHES) SALT STORAGE (POUNDS) SHIPPING WEIGHT (POUNDS) INLET/OUTLET HEIGHT (INCHES) LOW SALT GRAINS/LBS MED. SALT GRAINS/LBS HIGH SALT GRAINS/LBS NF-60 2.0 38,000/12 56,000/20 64,000/30 23.0 32.0 3.5 13 x 54 18 x 40 375 404 57.5 NF-90 3.0 57,000/18 84,000/30 96,000/45 22.0 30.0 4.0 14 x 65 18 x 40 375 539 68.5 NF-120 4.0 76,000/24 112,000/40 128,000/60 25.0 34.0 5.0 16 x 65 24 x 41 525 677 68.5 NF-150-18 5.0 95,000/30 140,000/50 160,000/75 27.0 37.0 7.0 18 x 65 24 x 50 510 832 70.5 NF-150-21 5.0 95,000/30 140,000/50 160,000/75 31.0 41.0 9.0 21 x 62 24 x 50 510 946 70.5 NF-180-18 6.0 114,000/36 168,000/60 192,000/90 26.0 35.0 7.0 18 x 65 24 x 50 510 938 70.5 NF-180-21 6.0 114,000/36 168,000/60 192,000/90 30.0 40.0 9.0 21 x 62 24 x 50 510 1052 70.5 NF-210 7.0 133,000/42 196,000/70 224,000/105 29.0 39.0 9.0 21 x 62 24 x 50 510 1158 70.5 NF-240 8.0 152,000/48 224,000/80 256,000/120 32.0 42.0 12.0 24 x 72 24 x 50 340 1332 78.0 NF-270 9.0 171,000/54 252,000/90 288,000/135 31.0 41.0 12.0 24 x 72 24 x 50 340 1438 78.0 NF-300 10.0 190,000/60 280,000/100 320,000/150 30.0 40.0 12.0 24 x 72 24 x 50 340 1544 78.0 • Cubic feet of mineral and capacities as seen above are per mineral tank. • Product improvements and design changes subject to change without notice. • Service flow ratings are with the 1.5” meter. • Water Pressure 30 - 100 psi. • Limit of 2 ppm of ferrous iron. Add 3 grains of hardness per ppm of iron when sizing. • Water temperature is not to exceed 110.F and cannot be subject to freezing • See owners manual for specific operating details conditions. • These conditioners will not purify or make your water safe to drink. • Inlet/outlet heights are approximate only. Meter Information: Meter Accuracy Range 1-1/2” (Standard) 1.5 - 75 gpm ± 5% 1-1/2” (Low Flow) 0.7- 40 gpm ± 5% Meter Capacity Range 1-1/2” (Standard) Standard: 625...