¦ After installation Use after throwing away the water in the water tank up to full level more than twice. Hot water caution ¦ Take care to avoid burns when extracting hot water. ¦ Draining hot water Pull the drainage door at the side downwards, and insert the drainage hose; this way, you can completely drain the hot water inside the system. . Note: take care not to burn yourself, since hot water suddenly starts to drain as soon as the hose is inserted. ¦ How to Use Please Keep In Mind Preparati

Please check if the Cooling/Heating mode indicator lamp is on (See P18). 1 When using Cold/Hot water turn on the Cold/Hot water function. When the cold water temperature indicator on the indication part is on, turn the cold/room water changeover faucet to the left and push the cuptouch lever and you may drink cold water (See P19). 2 Select cold water mode selection button to drink cold water and check the operation condition of the cooling mode indicator. When the hot water temperature lamp on t

22 23 INSTALLING METHOD Be cautious Installation place. When installing avoid bumpy areas, damp areas, and area in the reach of direct sunlight, dusty areas, water splashing areas. ¦ Installation place. Have 10Cm space between the wall and the product and install above the floor where it is solid and flat. ¦ After installation After installing use after throwing away room water more than twice. ¦ Cold water pipe Always connect to the cold water pipe. (When it is connected to hot water pipe the f

If not observed, serious injury or property damage could occur. Warning If not observed, slight injury or property damage could occur. Caution Electricity Safety Safety Information Electricity Safety - For Information Do not use a damaged power cord or plug, and loose outlet. Electrical shock or fire may occur as a result. Do not unplug by pulling the cord or handle the plug with wet hands. Electrical shock or fire may occur as a result. Do not plug into an outlet or power strip that is being us

. . This composite filter has the function to improve water taste and reduce aesthetic chlorine. 21 The Hydrogen Ion Concentration (pH) measuring cycle and precautions. Immediately after installing this device, measure the Hydrogen Ion Concentration (pH) after extracting string ionized alkaline water for at least 4 minutes. Please check the Hydrogen Ion Concentration (pH) of the ionized water at least once a month. Tips Measuring the hydrogen ion Concentration (pH) 1. Extract weak ionized alkali

R/O Feed Water Disposed Water Feed Valve for Flushing Disposed Water Controlling Valve Feed Valve for Feed Water LPS Filtered Water Check Fitting Stem Elbow HPS Neo-Sense filter RO Membrane filter Fine Post-Carbon filter Straight Fitting (1/4"+3/8") Booster Pump HPS_A Without any prior notice, all or parts of the product are subject to change for the purpose of improving the performance of the product. Efficiency rating means the percentage of the influent water to the system that is available t

• Warranty card is included in this User’s Manual. 1 FEATURES 1. Continuous extraction function If you let the coke lever down, as you can extract the water continuously in a state of stopped lever, it is convenient. 2. Uniform water pressure keeping function In the area with the high water pressure, it protects the inside of the product from the high water pressure by providing a main water with an uniformed water pressure. 3. Closed tank for preventing the secondary pollution It is the hygieni

The components of our water filtration system are as followed: WARNING NEO-SENSE FILTER Reduces various foreign bodies that come from the feed water pipe such as dirt, sand, rust particles, VOCs and chlorine. MEMBRANE FILTER(RO) FINE POST-CARBON FILTER The RO(Reverse Osmosis) Membrane filter reduces Pentavalent Arsenic, Barium, Cadmium, Mercury, Selenium, Radium 226/228, Trivalent chromium, Hexavalent chromium, Lead, Nitrate/Nitrite. The influent water to the system shall include the following c

Fire may occur as a result. Close the main water supply valve and unplug the power cord when not using for a long time. Electrical shock or fire may occur as a result. Do not attempt to repair the power cord. Electrical shock or fire may occur as a result. Unplug the unit before repair, inspection, or replacement. Electrical shock may occur as a result. Do not run the power cord under a heavy object to prevent it from being damaged. Electrical shock or fire may occur as a result. If the cord or

Is room water overflowing or leaking? Is the power turned on? Is the water being supplied properly? Is the water inlet hose too long? Is the hose bent? Is the water supply valve closed, or the water supply cut? Is it about time to change the filter? Request filter change. Open the water supply valve. Straighten the hose. Shorten the water inlet hose to 5m or less. Check the water supply valve. Connect the power to the voltage rating that matches it on the rating plate. Request A/S. / . Please re