Log:
Évaluations - , GPA: ( )

Instructions Sony, Modèle PK-R1FL

Fabricant : Sony
Taille : 91.46 kb
Nom Fichier : 3cf98d5f-4ecd-4114-91d3-c09010f35101.pdf

Langue d'enseignement: en

Le document est chargé, s'il vous plaît patienter
Le document est chargé, s'il vous plaît patienter

Facilité d'utilisation


Sffi70%U±®BÆffi£fëfflbruSTo Printed on 70% or more recycled paper. 3 ^jb^-ÿKjb^-tI^^jb^-aK-fc^icpu 3*®*yc »toSo English Replacing the Air Filter Notes • When removing the air filter from the projector, take care that no dust or object gets into the inside of the projector. • Whenever you replace the lamp unit, be sure to replace the air filter with a new one. The illustrations below show the case when the air filter is replaced with the projector installed on the ceiling. If you replace the air filter with the projector placed on a table or floor, place a protective sheet (cloth) and turn the projector over so you can see its underside. 1 Loosen the three screws on the filter holder to remove the air filter cover and filter holder, then remove the air filter. Screws Note The air filter cover is used only when the projector is installed on a ceiling. 2 Insert a new air filter into the projector so that the projection part on the air filter is aligned with a hole on the projector. 3 Replace the filter holder and air filter cover, then fasten the three screws....

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories