Log:
Téléchargements : 2   Taille : 258 kb   Fabricant : Briggs & Stratton  
Catégorie : Air
@name

A A Fig. 3 Fig.4 6 MOUNTING THE AIR CLEANER TO THE CEILING OR OVERHEAD SUPPORT This unit weighs approximately 60 pounds. When mounting overhead, be certain that the unit issecurely fastened and supported. 1. Locate the four 1" eye bolts and the four 1/4-20 flange nuts supplied with the unit. 2. Use a flat blade screwdriver (not supplied) to remove the four screws (C) Fig. 5 from the top of air cleaner (D). 3. Thread one flange nut on each bolt approximately 3/4". 4. Thread the eye-bolts (F) Fig.

Téléchargements : 6   Taille : 331 kb   Fabricant : Briggs & Stratton  
Catégorie : Air
@name

WARNING: IN ALL CASES, MAKE CERTAIN THE RECEPTACLE IN QUESTION IS PROPERLY GROUNDED. IF YOU ARE NOT SURE HAVE A QUALIFIED ELECTRICIAN CHECK THE RECEPTACLE. GROUNDED OUTLET BOX CURRENT CARRYING PRONGS GROUNDING BLADE IS LONGEST OF THE 3 BLADES GROUNDED OUTLET BOX GROUNDING MEANS ADAPTER Fig. A Fig. B 4 EXTENSION CORDS Use proper extension cords. Make sure your extension cord is in good condition and is a 3-wire extension cord which has a 3-prong grounding type plug and matching receptacle which w

Téléchargements : 32   Taille : 337 kb   Fabricant : Briggs & Stratton  
Catégorie : Air
@name

795550 Bracket.Control Used on Type No(s). 333B 793352 Used on Type No(s). 0111, 0114, 0556, 0705, 1085, 3705. Armature.Magneto Used on Type No(s). 524 691876 525 691320 Used on Type No(s). 0113, 0114, 0115. Seal.Dipstick Tube Tube.Dipstick 0113, 1010. 0112, 0113, 0115, 529 692189 Grommet 227 697402 Lever.Governor 0116, 1010. 534 691417 Screw Control 334 691061 Screw (Air Cleaner) 268 691025 Casing.Control Wire (Magneto Armature) 535 698369 Filter.Air Cleaner 269 691026 Wire.Control 337 802592S

Téléchargements : 1   Taille : 431 kb   Fabricant : Briggs & Stratton  
Catégorie : Air
@name

Daily or before every use, clean accumulated debris from engine. Keep linkage, springs and controls clean. Keep area around and behind muffler free of any combustible debris. Keep muffler area clean and muffler in working order. Daily or more often, before running engine, clean muffler area to remove all grass and combustible debris. If engine muffler is equipped with spark arrester screen, remove for cleaning and inspection. Replace if damaged or plugged. CONTROL ADJUSTMENTS WARNING Prevent uni

Téléchargements : 2   Taille : 431 kb   Fabricant : Briggs & Stratton  
Catégorie : Air
@name

[2] Disconnect spark plug wires and keep away from spark plugs. Dis- connect battery (if equip- ped with electric starter) at negative terminal. [3] With engine OFF but still warm remove oil drain plug and drain oil into appropriate receptacle. [4] Reinstall drain plug. Remove dipstick. [5] Fill to FULL mark on dipstick with new oil. Do not overfill. Note: Engine without oil filter holds approximately 1-7/8 quarts (60 ounces; 1.8 liters). Engine equipped with filter holds approximately 2 quarts

Téléchargements : 0   Taille : 431 kb   Fabricant : Briggs & Stratton  
Catégorie : Air
@name

(See parts list. Single – use pouches of gas additive are available from your service dealer.) If you use a gas additive, run the engine for several minutes to circulate the additive through the carburetor. Then, engine and fuel can be stored up to 24 months. [2] While engine is still warm, change oil. [3] Remove spark plugs and pour about 1 oz. (30 ml) of engine oil into each cylinder. Replace spark plugs and crank slowly to distribute oil. [4] Clean engine of surface debris, chaff or grass. [5

Téléchargements : 0   Taille : 457 kb   Fabricant : Briggs & Stratton  
Catégorie : Air
@name

NOTE: This sheet of instructions and safety information is not meant to cover allpossible conditions and situations that may occur. Read entire Operating & Maintenance Instructions for this engine AND the instructions for the equipmentthis engine powers. Failure to follow instructions and safety information couldresult in serious injury or death. The safety alert symbol () is used to identify safety HAZARD SYMBOLS AND MEANINGR information about hazards that can result in personal injury A signal

Téléchargements : 32   Taille : 477 kb   Fabricant : Briggs & Stratton  
Catégorie : Air
@name

Briggs & Stratton Corporation Milwaukee, Wisconsin 53201 28N700, 287700, 28P700, 28Q700, 28S700, 28U700, 310700, 311700, 312700, 313700 For future reference, write your engine Model/Type/Code here. Model Type Code For future reference, write your engine Date of Purchase here. Before starting this engine, read and understand this Operator/Owner Manual. Failure to follow instructions in this manual could result in serious injury or death. Table of Contents In the Interest of Safety . . . . .

Téléchargements : 0   Taille : 477 kb   Fabricant : Briggs & Stratton  
Catégorie : Air
@name

Change oil ¦ . Note 1 Replace oil filter, if equipped . Service air cleaner pre-cleaner, if equipped . Note 2 Service air cleaner cartridge, if not equipped with pre-cleaner . Note 2 Service air cleaner cartridge, if equipped with pre-cleaner . Note 2 Inspect spark arrester, if equipped . Clean cooling system . Note 2 Replace spark plug and fuel filter, if equipped . Check valve clearance . ¦ Change oil after first 5 hours, then after every 50 hours or every season. Note 1: Change oil every 25 h

Téléchargements : 9   Taille : 477 kb   Fabricant : Briggs & Stratton  
Catégorie : Air
@name

Operate engine in FAST position. Stop engine Do not move choke control to CHOKE position to stop engine. Backfire or engine damage may occur. Keep throttle control in FAST position. Turn key to OFF. Always remove key from switch, if equipped, when equipment is not in use or left unattended. Rewind starter Typical stop controls When engine is transported, close fuel shut-off valve (if equipped) to prevent fuel leakage. 1/4 TURN Typical fuel shut-off Typical fuel shut-off In the USA and Canada, a





catégories