Read warning labels on prescriptions to determine if your judgement or reflexes are impaired while taking drugs. If there is any doubt, do not attempt to use this product. 5. INDUSTRIAL APPLICATIONS MUST FOLLOW OSHA REQUIREMENTS. SKU 46361 PAGE 2 REV 07/03 6. CHECK FOR DAMAGED PARTS. Before using this product, carefully check that the Air Filter System will operate properly and perform its intended function. Check for damaged parts and any other conditions that may affect the operation of this m

Do not point or discharge air from the Pistol at people or animals. Injuries could occur. 2. Keep work area clean. Cluttered areas invite injuries. Observe work area conditions. Keep work area well lighted. Before operating, wipe up spilled liquids before standing on the floor to avoid slipping. 4. Keep children away. Children must never be allowed in the work area. 5. Store idle equipment. When not in use, tools must be stored in a dry location to inhibit rust. Always lock up tools and keep out

(Figure A) 2. Once the Mounting Bracket has been attached to a desired location, unscrew and remove the Retaining Ring (part #23) from the top of the Mini Air Filter. 3. Insert the top of the Mini Air Filter through the Mounting Bracket and secure by replacing the Retaining Ring. 4. Attach a 1/4” NPT Female hose connector to the air compressor supply hose. Then, wrap the threads of the 1/4” NPT Female hose connector with approximately 3” of Teflon tape. Next, connect the 1/4” NPT Female hose con

Safety Warnings and Precautions WARNING: When using tools, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment. Read all instructions before using this tool! Keep work area clean1. . Cluttered areas invite injuries. Observe work area conditions2. . Do not use in damp or wet locations. Don’t expose to rain. Keep work area well lighted. Do not use in the presence of flammable gases or liquids. Keep children away3. . Children must never b

All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts, please call 1-800-444-3353 Specifications Item Description Operating Pressure 160 PSI (maximum) Air Inlet and Outlet Size Inlet: 1/2" NPT Outlet: 1/4" NPT Features Replacable air filter element Overall Dimensions 11-3/4" Tall x 3-7/8" DIA. x 8-3/4"Deep Weight 5-1/2 lbs. Fil