Log:
Évaluations - 0, GPA: 0 ( )

Instructions Bosch, Modèle DWB129750/01

Fabricant : Bosch
Taille : 3.87 mb
Nom Fichier :
Langue d'enseignement: itenesfrdenlpt
Aller à la télécharger



Facilité d'utilisation


Length of the power cord: approx. 1.30 m. This extractor hood complies with the EC interference suppression regulations. Installation The extractor hood is designed to be mounted on the wall. • During installation, optional accessories may also require fitting. • Observe the minimum distance between hob and extractor hood (see ”Safety instructions”)! • Avoid damaging the sensitive surfaces! Preparing the wall RISK OF INJURY, DAMAGE TO PROPERTY Before drilling the holes for the designated installation location, check for concealed electrical cables and other lines. The wall must be level and vertical. • The enclosed screws and wall plugs are suitable for solid brickwork. Use the appropriate fixing materials for other wall structures (e.g. plaster board, porous concrete, poroton bricks). Ensure that the wall has adequate load bearing capacity. • Ensure that the depth of the drilled holes corresponds with the length of the screws. • Ensure that the wall plugs are secure. Max. weight in kg: 40 Design subject to modification in line with technical development. Installation preparations 1. Mark a centre line on the wall from the ceiling to the lower edge of the extractor hood. 2. Using the enclosed template, mark positions for the screws and, to facilitate attachment, the contour of the attachment area. The lower edge of the template corresponds to the lower edge of the extractor hood. 3. Drill 2x 8 mm holes for attachment of the extractor hood and 2x 8 mm holes for the fixing bracket for the flue duct and press in wall plugs flush with the wall. 4. Screw on the fixing bracket for the flue duct. 5.Screw on the brackets for the extractor hood:hand tight, max. 3 Nm. Ensure that the washers and brackets are positioned correctly! 31 Installation Attachment and alignment 1. Initially remove the protective foil from the back of the extractor hood and, following installation, remove foil completely. 2. Mount the extractor hood, ensuring that the back is attached firmly to the brackets.. 3. Align the extractor hood horizontally by turning the brackets.. If required, the extractor hood can be moved to the right or left .. Locking screws and locking caps 1. Mark the holes for the safety screws. Detach the extractor hood, drill holes for the safety screws and press in wall plugs flush with the wall. 2. Attach the extractor hood and screw in the safety screws tightly. 3. Press the safety caps with the arrow upwards onto the brackets until they click into position .. RISK OF INJURY Check that all locking screws and locking caps have been attached securely! 4. Connect the pipes (see ”Connecting pipes”). 5. Connect to the power supply (see ”Electrical connection”). Removing the safety caps Remove the locking caps from the brackets using a suitable tool, e.g. a flat-blade screwdriver. Installation Installing the flue ducts 4. Place flue ducts on the extractor hood, push the inner flue duct upwards and attach the RISK OF INJURY left and right sides to the fixing bracket. The insides of the flue ducts may have sharp edges. We recommend wearing protective gloves during installation. 1. Separate the flue ducts.To do this, remove the adhesive tape. 2. Remove the protective film from both flue ducts. 3. Insert one flue duct into the other. NOTE: Avoid scratching the flue ducts when inserting them, e.g.by placing the installation template as protection over the edge of the outer flue duct. • Note the position of the slots in the flue duct! – Exhaust-air mode: Slots of the inner flue duct downwards. – Circulating-air mode: Slots of the inner flue duct upwards. 5. Screw the inner flue duct with 2 screws to the sides of the fixing bracket. Tabel de matieres Informations generales ....................................................................................... 34 Conseils pour le respect de l’environnement ....................................................................................34 Avant la premiere utilisation......................................................................................................................... 34 Consignes de securite ......................................................................................... 35 Conformite d’utilisation .................................................................................................................................. 35 Securite technique ............................................................................................................................................35 Consignes speciales pour les appareils de cuisson au gaz .......................................................36 Utilisation correcte .............................................................................................................................................37 Montage correct ..................................................................................................................................................37 Modes de service .....

Ce manuel est également adapté pour les modèles :
Hoods - DWB129950/01 (3.87 mb)
Hoods - DWB129950/02 (3.87 mb)
Hoods - DWT069750/01 (3.87 mb)
Hoods - DWT099750/01 (3.87 mb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories