Log:
Évaluations - 0, GPA: 0 ( )

Instructions Bosch, Modèle D79R57N0/01

Fabricant : Bosch
Taille : 5.95 mb
Nom Fichier :
Langue d'enseignement: itenesfrdenl
Aller à la télécharger



Facilité d'utilisation


Dispose of packaging materials properly (see Installation instructions). This extractor hood is designed for domestic use only. Light bulbs must always be fitted when the extractor hood is in use. Defective bulbs should be replaced immediately to prevent the remaining bulbs from overloading. Never operate the extractor hood without a grease filter. Overheated fat or oil can easily catch fire. If you are cooking with fat or oil, e.g. chips, etc., never leave the cooker unattended. Carefully clean the extractor hood before switching on for the first time. Do not place any objects on the extractor hood. Operating procedure The most effective method of removing vapours produced during cooking is to: . Switch the ventilator ON as soon as you begin cooking. . Switch the ventilator OFF a few minutes after you have finished cooking. Fan OFF Saturation indicator LightFan settings Intensive setting Fan follow-on Switching the fan ON: . Press the 1, 2 or 3 button. Switching the fan OFF: . Press the 0 button. Intensive setting: Maximum power is obtained at the intensive setting. It is only required for short intervals. . The P key for the intensive level should be pressed when browning and frying in an open pan. If you have switched on the hood by selecting the intensive level, it will be switched off again automatically after 5 minutes. . If you press the P key while the hood is running at fan level 1, 2 or 3, the electronic control will switch back automatically to the previously selected fan level after 5 minutes. . If you would like to end the intensive level before the five minutes have elapsed, press the 0 key (“Motor off”) or select a different level. It is possible to switch off the extraction function at any time by pressing the 0 key (motor “off”). Special functions: Intensive time: . You can set the intensive level running time to 3, 5 or 10 minutes by simultaneously pressing the P key and the 1, 2 or 3 key and you can store this setting. When delivered, the appliance is set to five minutes, i.e. the combination of the P key and the key 2. Fan follow-on: . Delayed shut-off is possible at any level. First press the required key 1, 2, 3 or P and then press the ! key. The delayed shut-off time for all levels is ten minu-tes. After these ten minutes, the ventilation switches off, but the lighting stays on. Interval ventilation: . Interval ventilation is a special feature of this appliance which periodically activates the fan for five minutes every hour. You can activate this function by simultaneously pressing the 0 key and, depending on the required extraction capacity, the 1, 2 or 3 key. This mode of operation is indicated by alternating illumination of the ! key together with the corresponding fan level indicator. You can switch off interval ventilation by pressing the 0 key. Lighting: . Briefly press the Ybutton to switch the light on and off. . The light can be switched on at any time, even though the fan is switched off. . Adjusting the brightness: Hold down the Ybutton until the desired brightness is obtained. 21 Grease filters: Metal filters are used to trap the greasy element of the vapours that develop during cooking. The filter mats are made from noncombustible metal. Caution: As the filter becomes more and more saturated with grease, not only does the risk of it catching fire increase but the efficiency of the extractor hood can also be adversely affected. Important: By cleaning the metal grease filters at appropriate intervals, the possibility of them catching fire as a result of a build-up of heat such as occurs when deep-fat frying or roasting is taking place, is reduced. Saturation indicator: U The grease filter saturation display U flashes after an operating time of 30 hours to you indicate to you that you should clean the grease filter. The grease filters can of course be cleaned at any time, even if the grease filter saturation display has not started to flash. Filters and maintenance 2. Clean the filters. 3. Insert the clean filters back into the hood. Cleaning the metal grease filters: . In normal operation (1 to 2 hours daily), the metal grease filter must be cleaned 1 x...

Ce manuel est également adapté pour les modèles :
Hoods - D79R57N0GB/01 (5.95 mb)
Hoods - D99R7N0/01 (5.95 mb)
Hoods - D99R7N0/02 (5.95 mb)
Hoods - D99R7N0GB/01 (5.95 mb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories