Évaluations - 3, GPA: 4 ( )

Fabricant : Samsung Taille : 838.71 kb Nom Fichier : Langue d'enseignement:

2. Remove Chilled tray. 3. Unscrew by plus-type driver then take out lamp cover. (optional model only) 4. Turn the lamp counter clockwise. 5. Replace new lamp same specification as original one. Warning ! : Disconnect power supply before replacing the lamp. SETTING UP THE REFRIGERATOR ICE MAKING Fill the ice tray with 1) Step 1 water at about 80% of Clean up inside of the refrigerator with a its capacity, or at its clean cloth. “water level” indicator. Step 2 Insert the power plug into the socket while keep the door open for checking the interior light, Then turn the temperature control button to “MAX”. Step 3 Close the door and let the refrigerator operate for 2-3 hours. Step 4 Check the refrigerator temperature by touching inside the freezer. 2) Carefully place the ice tray on the freezer shelf otherwise the splashed water will be frozen and cause the ice tray is stuck hard. 3) Temp. Control For making quick ice cubes, the temperature control button must be set to “MAX” 4) The water will become the ice cubes with in 3-4 hours. Please remove the ice tray by pulling it out. Never use any kind of instrument. This may cause damage on the freezer. To take the ice cubes of the the ice cube tray, you should gently twist the ice tray (As shown), Do not bend it over. 5) Step 5 The appropriate temperature should be controlled by turing the temperature control button to “4”, or the desired temperature can be adjust. Now your refrigerator is ready to work. NOTE : After unplug the appliance, wait for about 5minutes before restarting. Wait 5 minutes TEMPERATURE CONTROL DEFROSTING The temperature control is level “2” • The temperature at low level “2” is used if extreme cool is no used. • It is used when there is not much food in the refrigerator. Temp. Control The temperature control level “4” • The temperature at level “4” is suitable for storing food. • It is appropriate for operating the refrigerator. Temp. Control The temperature control level “MAX” • “MAX” is properly used if the power cool is in need. • It is used when there are a lot of food. Temp. Control Defrosting should be often operated, as the thick frost (1/4inch) may cause low efficiency of the refrigerator. 1) If the thick frost is over the red level, should push the defrosting button. Check level 2) As soon as the “Push Defrosting” is pushed, the frost is gradually defrosting. 3) Do not use a knife or other metal instruments to remove ice/frost. It may cause damage on the freezer. 4) After defrosting, the button will pop up and the refrigerator working properly. NOTE : To save energy consumption, Do not set the refrigerator temperature lower than necessary USING THE WATER DISPENSER (MODEL WITH WATER DISPENSER ONLY) If dringking water is needed, push the To refill the water tank, remove the cap water dispenser lever with a glass. and fill it up with drinking water, then keep the cap into place. When you want to clean water tank, let water out of the tank. Remove away from . then remove the w...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :