Évaluations - 5, GPA: 4.4
(
)
)
|
Facilité d'utilisation
Try to avoid opening and closing the door too frequently. • Take out foods from the fridge-freezer and firmly fix the loose items with tape. • Turn the leveling screws until they stop before moving the fridge-freezer. Otherwise the screw may scratch the floor or the fridge-freezer cannot move. • The Anti-Condensation pipe is installed around the front side of fridge-freezer as well as on the partition between fridge compartment and freezercompartment to prevent dewing, which is heating during the operation of compressor. • Especially after installation or when ambienttemperature is high, the fridge-freezer may feel hot,which is quite normal. Anti-Condensation Pipe Refrigerator work features As a result of thermal strain for components of a refrigerator appliance can be heard crackling noise that is not a defect and doesn’t affect efficiency of the appliance. This special sound when the thermo-regulator and compressor and turned on is a normal state, which appears during the working process of appliance’s electric installation. The gas refrigerant produces a slight noise even when the compressor is not running (this is not a defect). While refrigerator appliance working process can be heard: - flick of the temperature relay; - murmur of refrigerant flowing round cycle; - cracking noise because of the materials deformation by temperature. All that is not defect and doesn’t affect efficiency of the appliance. Care and Maintenance Lamp Replacement AWarning Remove/Install shelf 1. Unplug the power cord from the outlet. 2. Remove fridge shelves. 3. To remove the lamp cover, insert type driver in the underside of the lamp cover and pull it out forwards. 4. Turn the lamp counterclockwise. 5. Assemble in reverse order of disassembly. Replacement lamp must be the same specification as original. 6. MAXIMUM rated input of lamp should not to exceed 20 W. To Remove the shelf from refrigerator, at first - lift up it (1), and then - pull it out side (2). In case of wrong removing of the shelf, the damages of inner surfaces of refrigerator possible. • To install shelf into refrigerator follow similar: lift up front side of the shelf at the angle (3) and then insert it inside (4). In case of wrong installing of the shelf, the damages of inner surfaces of refrigerator possible. Care and Maintenance Removing/Installing bottom drawer of refrigerator To remove the bottom drawer from the refrigerator do the following: 1) Remove the lower basket from the door by lifting it up; 2) Pull the drawer until it stops and slightly lifting it up pull it to take it out; 3) Lift the front part of the drawer cover and pull it to remove; Warning Note 4) To install the drawer back, do the same steps in the reverse order. Make sure that the angle of the drawer is not skewed. Improper removing or installation can damage the interior parts of the refrigerator. Warranty does not cover mechanical damage (cracks, chips, dents and etc.) caused by the breaking of the rules of storage, transportation, operation, maintenance of the refrigerator, or application too much physical force. Care and Maintenance Before Cleaning Exterior Interior Grille and Drip Tray Exterior Dispenser Water Tank Cap Tank (Big & Small) Valve Assembly After Cleaning ik Warning Cleaning Be sure to unplug the power. Clean the outside of the fridge-freezer with a soft cloth soaked with hot water or liquid detergent. If you use a detergent, be sure to wipe it with a clean wet cloth. As above. Remove the Grille, wipe moisture out around the Door part and the Drip Tray using a clean cloth. Wipe moisture etc out outside of Dispenser and on the Dispenser Pad using a cloth. 1. Lift the Water Tank up by pressing the fixing Lever on the bottom of Water Tank and then remove it. 2. After removing the Cap Tank (Big), clean and fully rinse the inside/outside part of the Water Tank by using neutral cleansing agent. Clean and fully rinse the Cap Tank (Big & Small) by using neutral cleansing agent. Especially for the groove part of the Cap Tank, it is convenient to cleanse it by using a small brush. Clean and fully rinse the Valve Assembly by using a small brush. Rinse it while operating the bottom part of the valve assembly. Always fix the Sealing Rubber separated for cleansing at the existing position (may result in water leakage). Check that the power cord is not damaged, power plug has not overheated, and that the power plug is tightly inserted into the outlet. Be sure to dry the appliance with a cloth after washing it with water. Do not use abrasive, petroleum, benzene, thinner, hydrochloride acid, boiling water, rough brush, etc, as they may damage parts of the fridge-freezer. Trouble Shooting Before calling for service, check this list or call in Support service of clients. It may save your time and expense. This list includes common occurrences that are not the result of defective workmanship or materials in this appliance....
Ce manuel est également adapté pour les modèles :Réfrigérateurs - GA-B379UCA (9.22 mb)
Réfrigérateurs - GA-B379ULCA (9.22 mb)
Réfrigérateurs - GA-B409BQA (9.22 mb)
Réfrigérateurs - GA-B409PQA (9.22 mb)