Évaluations - 3, GPA: 3.7 ( )

Fabricant : Avanti Taille : 906.3 kb Nom Fichier : 344536EN.pdf Langue d'enseignement:

2. Press the appliance ON/OFF button if the display is off. 3. The alarm buzzer could operate after few seconds. To reset the alarm refer to "High temperature alarm". 4. If "dEMo" appears on the display, the appliance is in demonstration mode. Refer to "WHAT TO DO IF..." paragraph. 5. The temperature indicators show the set default temperature. To select a different set temperature refer to "Temperature regulation". Switching off To switch off the appliance do these steps: 8 8 Control panel 1. Press the appliance ON/OFF button for 5 seconds. 2. The display switches off. 3. To disconnect the appliance from the power disconnect the mains plug from the power socket. Switching off the fridge To switch off the fridge: 1. Press the Mode button until the corresponding icon appears. The fridge Off indicator and the fridge compartment indicator flash. The fridge temperature indicator shows dashes. 2. Press the OK button to confirm. 3. The fridge Off indicator is shown. Switching on the fridge To switch on the fridge: 1. Press the fridge temperature regulator. Or: 1. Press the Mode button until the corresponding icon appears. The Fridge Off indicator flashes. 2. Press the OK button to confirm. 3. The fridge Off indicator goes off. To select a different set temperature refer to "Temperature regulation". Temperature regulation The set temperature of the fridge and of the freezer may be adjusted by pressing the temperature regulators. Set default temperature: • +5°C for the fridge • -18°C for the freezer The temperature indicators show the set temperature. The set temperature will be reached within 24 hours. After a power failure the set temperature remains stored. Minute Minder function The Minute Minder function is to be used to set an acoustic alarm at the preferred time, useful for example when a recipe requires to cool down a mixture for a certain length of time, or when a reminder is needed in order not to forget the bottles placed in the freezer for fast cooling. To switch on the function: 1. Press the Mode button until the corresponding icon appears. The Minute Minder indicator flashes. The Timer shows the set value (30 minutes) for a few seconds. Control panel 9 2. Press the Timer regulator button to change the Timer set value from 1 to 90 minutes. 3. Press the OK button to confirm. The Minute Minder indicator is shown. The Timer start to flash (min). At the end of the countdown the Minute Minder indicator flashes and an audible alarm sounds: 1. Remove any drinks contained in the freezer compartment. 2. Press OK button to switch off the sound and terminate the function. It is possible to deactivate the function at any time during the countdown: 1. Press the Mode button until the Minute Minder indicator flashes. 2. Press the OK button to confirm. 3. The Minute Minder indicator goes off. It is possible to change the time during the countdown and at the end by pressing the Temperature colder button and the Temperature warmer button. Child Lock function To lock the buttons from unintentional operation select the Child Lock function. To switch on the function: 1. Press the Mode button until the corresponding icon appears. 2. The Child Lock indicator flashes. 3. Press the OK button to confirm. The Child Lock indicator is shown. To switch off the function: 1. Press the Mode button until the Child Lock indicator flashes. 2. Press the OK button to confirm. 3. The Child Lock indicator goes off. High temperature alarm An increase in the temperature in the freezer compartment (for example due to an earlier power failure) is indicated by: • flashing the alarm and freezer temperature indicators • sounding of buzzer. To reset the alarm: 1. Press any button. 2. The buzzer switches off. 3. The freezer temperature indicator shows the highest temperature reached for a few seconds. Then show again the set temperature. 4. The alarm indicator continue to flash until the normal conditions are restored. When the alarm has returned the alarm indicator goes off. Door open alarm An acoustic alarm will sound if the door is left open for a few minutes. The door open alarm conditions are indicated by: 10 10 Control panel • flashing Alarm light • acoustic buzzer When normal conditions are restored (door closed), the alarm will stop. During the alarm, the buzzer can be switched off by pressing alarm button. COOLMATIC function If you need to insert a large amount of warm food, for example after doing the grocery shopping, we suggest activating the COOLMATIC function to chill the products more rapidly and to avoid warming the other food which is already in the refrigerator. To switch on the function: 1. Press the Mode button until the corresponding icon appears. The COOLMATIC indicator flashes. 2. Press the OK button to confirm. The COOLMATIC indicator is shown. The COOLMATIC function shuts off automatically after approximately 6 hours. To switch off the function before its automatic end: 1. Press the Mode button until the COOLMATIC indicator f...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :