To support it, use firm and solid pads that are inflammable. Never use the packaging materials for supporting. Level the appliance with the adjustable legs whenever necessary. Turn clockwise to raise the refrigerator, and anticlockwise to lower it. Do not expose the appliance to direct sunlight or heat source. Do not expose the appliance to rain and moisture. Keep the appliance dry and clean to prevent rust and deterioration of electric insulation. To prevent risk of injury and accident, do not

• The doors are closing properly. • The cooling system at the rear of the appliance is clean and free of dust, and not touching the rear wall. • There is enough ventilation at the side and rear walls. The appliance is noisy • The appliance is level and stable. • The side and rear walls are clear, and there is nothing resting on the appliance. • The cooling gas in the refrigerator will make a slight bubbling noise, even when the compressor is not running. There is water in the lower part of the r

• During operation, it is normal for the fan to run, even when the compressor is not running. The light does not work, check • There is power to the appliance • The house fuses or circuit breakers are intact and the fuse in the plug has not blown. • The light button is not set to off Please note: The LED lighting cannot be replaced without a service call. If the light fails, contact CDA Customer Care. The door will not close properly, check • The appliance is level and stable. • If the door has

• The LED display for the lower zone will flash. • The preset temperature for the upper zone is 10.C / 50. F and for the lower zone is 16.C / 60. F. • To change the temperature display from Fahrenheit to Celsius, or Celsius to Fahrenheit, press and hold the up and down • buttons simultaneously for five seconds. • To view the set temperature in either zone, touch the up or down button at any time and the set temperature will flash in the LED display for five seconds. Optimal temperature selection

The minimum space required is: FWC151 – 150 mm wide x 555 mm deep x 825 mm high FWC301 – 300 mm wide x 580 mm deep x 825 mm high FWC601 – 600 mm wide x 580 mm deep x 825 mm high FWC621 – 600 mm wide x 580 mm deep x 825 mm high Please note: When the product is installed, there should be a small ventilation gap between the top of the unit and the underside of the worktop (6 mm or .”) These products should not be installed: 1. In direct sunlight 2. Adjacent to a heat source (oven or radiator) 3. Be

• The preset temperature is 12.C / 54. F. • To view the set temperature, touch the up or down button at any time and the set temperature will flash in the LED display for five seconds. Temperature display To change the temperature display from Fahrenheit to Celsius, or Celsius to Fahrenheit, touch the F./C. selection button. Optimal temperature selection Whilst wine is best stored at temperatures between 13 and 15. C, your wine can also be stored at drinking temperature. For red wine this is bet

As a reminder of the need to dispose of household appliances separately, the product is marked with a crossed-out wheeled dustbin. 1 Before first use You must allow the appliance to settle for at least twenty four hours prior to switching the power on. It is recommended that you remove all internal and external packaging and clean the interior of the appliance prior to first use, using a solution of bicarbonate of soda and warm water and then thoroughly dry the interior. The appliance may have a

F. • To change the temperature display from Fahrenheit to Celsius, or Celsius to Fahrenheit, press and hold the light button for five seconds. • To view the set temperature, touch the up or down button at any time and the set temperature will flash in the LED display for five seconds. Optimal temperature selection Whilst wine is best stored at temperatures between 13 and 15. C, your wine can also be stored at drinking temperature. For red wine this is between 15 and 17. C, and for white wine bet

• Harby Road • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : INSTRUCTIONS FOR USE BEFORE USING THE APPLIANCE SAFEGUARDING THE ENVIRONMENT PRECAUTIONS AND GENERAL RECOMMENDATIONS HOW TO USE THE REFRIGERATOR COMPARTMENT HOW TO USE THE FREEZER COMPARTMENT HOW TO DEFROST THE FREEZER COMPARTMENT HOW TO CLEAN THE REFRIGERATOR COMPARTMENT CARE AND MAINTENANCE TROUBLESHOOTING GUIDE AFTER-SALES SERVICE INSTALLATION ELECTRICAL CONNECTION BEFO

Defrost the freezer compartment once or twice a year or when the formation of ice on the racks is excessive. It is perfectly normal for ice to form on the racks. The amount and speed at which the ice forms depends on room air temperature and humidity and the frequency with which the door is opened. Ice formation is concentrated on the racks at the top of the freezer compartment. If possible, defrost the freezer compartment when it is nearly empty. • Remove the food from the freezer compartment