Log:
Évaluations - , GPA: ( )

Instructions Philips, Modèle HX6781/02

Fabricant : Philips
Taille : 651.14 kb
Nom Fichier :

Langue d'enseignement: en

Le document est chargé, s'il vous plaît patienter
Le document est chargé, s'il vous plaît patienter

Facilité d'utilisation


Note:When the Clean and White mode is selected, the Easy-start feature is inactive. , -- EngliSh Deactivating or activating the Easy-start feature 1 Attach your brush head to the handle. Place the handle in the plugged-in charger. -To deactivate Easy-start: Press and hold the power on/off button for 2 seconds.You hear 1 beep to indicate that the Easy-start feature has been deactivated. -To activate Easy-start: Press and hold the power on/off button for 5 seconds.You hear 2 beeps to indicate that the Easy-start feature has been activated. Note: Using the Easy-start feature beyond the initial ramp-up period is not recommended and reduces Sonicare’s effectiveness in removing plaque. Smartimer® The Smartimer® indicates that your brushing cycle is complete by automatically turning off the toothbrush at the end of the brushing cycle. Dental professionals recommend brushing no less than 2 minutes twice a day. If you want to pause or stop brushing during your 2-minute cycle, press and hold the power on/off button for 2 seconds. Press the power on/off button again and the Smartimer picks up where you left off. The Smartimer automatically resets to the beginning of a 2-minute cycle if: -brushing is paused for 30 seconds or longer. -the handle is returned to the charger. Quadpacer® (select models) - - - 12431243 The Quadpacer® is an interval timer that has a short beep and pause to remind you to brush the 4 sections of your mouth evenly and thoroughly. When you use the two-minute Clean or Sensitive mode, you hear a short beep and a pause in brushing action at 30, 60 and 90 second intervals. When you use the Clean and White mode, you hear and feel a change in the brush head sound and motion after 2 minutes of Clean mode. Then move the brush head to the visible top front teeth and brush them for 15 seconds. At the final beep and pause, move to the visible bottom teeth and brush them for 15 seconds. 10 EngliSh Cord wrap on deluxe charger (select models) If your model includes the deluxe charger cover and base, the travel charger is pre-installed inside the cover. If you want to shor ten the power cord, you can store excess cord in the cord wrap feature built into the charger base. 1 To separate the charger cover from the charger base, press the two gray snap bars on the charger base and pull the white charger cover upwards. Wrap excess power cord around the gray charger base as shown in the picture. Be sure to wrap the cord on the inside of the two snap levers. 3 When you have stored the excess cord, guide the power cord through the small groove in the rear of the gray charger base. 4 Reattach the charger cover by pressing it down over the charger base until it snaps into place. Tip: For extra convenience during travel, you can remove the travel charger and use it without the charger cover and charger base. Cleaning Do not clean brush heads, handle, charger or charger covers in the dishwasher. Toothbrush handle 1 Remove the brush head and rinse the metal shaft area with warm water. Do not push on the rubber seal on the metal shaft with sharp objects, as this may cause damage. Use a damp cloth to wipe the entire surface of the handle. EngliSh 11 Brush head 1 Rinse the brush head and bristles after each use. Remove the brush head from the handle and rinse the brush head connection at least once a week with warm water. Charger 1 Unplug the charger before cleaning. Use a damp cloth to wipe the surface of the charger. Storage If you are not going to use the product for an extended period of time, unplug it from the electrical outlet, clean it and store it in a cool and dr y place away from direct sunlight.You can use the cord wrap (select models) to store the power cord in an organized manner. You can store brush heads on the pegs at the back of the charger. Replacement Brush head Replace Sonicare brush heads ever y 3 months to achieve optimal results. Use only Sonicare ProResults replacement brush heads. Disposal At the end of product life and prior to disposal, please remove the rechargeable batter y from the handle by following the instructions below. Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preser ve the environment. The built-in rechargeable batter y contains substances that may pollute the environment. Always remove the batter y before you discard the appliance, and recycle or dispose of the batter y according to local waste management requirements. If you have any recycling questions, contact your local waste management office. Removing the rechargeable battery Please note that this process is not reversible. - - - - - - - - 1 EngliSh To remove the rechargeable batter y, you need a flat-head (standard) screwdriver. Obser ve basic safety precautions when you follow the procedure outlined below. Be sure to protect your eyes, hands, fingers, and the surface on which you work. 1 To deplete...

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories