Évaluations - 5, GPA: 3.2
(
)
)
|
Facilité d'utilisation
6.) When you are finished listening press the Power button on the main unit or the remote control to switch the power ‘Off’. The display lighting turns off and the display changes from radio frequency to the correct time. NOTE: The system remembers the last station and the volume level that you had selected before the power was switched ‘Off’ and automatically returns to that station and volume level when the power is switched ‘On’ again. 17 iP550_041907.p65 17 19/4/2007, 17:56 Antenna Information Antenna Information AM: The AM bar antenna is located inside the cabinet. If AM reception is unsatisfactory, try turning the entire unit slightly until the AM antenna is picking up the strongest possible signal. FM: The telescopic rod FM antenna is located on the left side of the cabinet. Pull it out of the cabinet as far as it will go until the swivel base is exposed. Then raise the antenna to the vertical position, or to the position that provides the best FM reception. CAUTION: THE FM ROD ANTENNA MUST BE PULLED ALL THE WAY OUT BEFORE ATTEMPTING TO RAISE IT TO THE VERTICAL POSITION. 18 iP550_041907.p65 18 19/4/2007, 17:56 Presetting Stations In The Tuner Memories The tuner in this system has 20 preset station memories that allow you to memorize up to 10 of your favorite FM stations and 10 of your favorite AM stations for immediate recall at the touch of a button. 1.) Tune to the first station that you wish to memorize by either the Automatic or Manual Tuning method in the “Listening To The Radio” section. Example: FM 93.5 MHz. 2.) When the desired station appears in the display press the Memory button once. The MEMORY indicator and memory number “01” begin flashing in the display. 3.) Within 10 seconds, while the indicators are still flashing, press the Memory button again. The indicators stop flashing and your station is now stored in preset memory number 01. 4.) Tune to the next station you wish to store. Example: FM 98.7 MHz. 5.) Press the Memory button once. The MEMORY indicator and memory number “01” begin flashing. Press the Preset + button once to advance the memory number from “01” to “02”, and then press the Memory button once more. The MEMORY and “02” indicators stop flashing to indicate that your station is now stored in preset memory number “02”. 19 iP550_041907.p65 19 19/4/2007, 17:56 6.) Repeat steps 4 and 5, selecting a different preset memory number each time until you have stored up to 10 FM stations in the memory. 7.) Press the Band/iPod Play button to switch from the FM band to the AM band and then follow the above procedure to enter up to 10 of your favorite AM stations in the tuner memory. Recalling Preset Stations Turn the system ‘On’, select the RADIO function and the desired band as usual. Then press the Preset + or Preset – buttons to scroll up or down through the preset memories to find your desired station. Changing Preset Stations 1.) Tune to the new station that you wish to memorize. 2.) Press the Memory button once. The MEMORY indicator and the memory number “01” indicators begin to flash. 3.) Press the Preset + or Preset – buttons to select the number of the preset station that you wish to change. 4.) Press the Memory button once more. The new station is stored in the desired memory location and the previously stored station is deleted from the memory. 20 iP550_041907.p65 20 19/4/2007, 17:56 21 iP550_041907.p65 19/4/2007, 15:50 * No adapters provided. Please use the adapters that were included with your 5G iPod® and 2G iPod® nano models at time of purchase. iPod® ADAPTER INFORMATION This system includes 5 different adapters designed to allow you to securely connect any “dockable” iPod® model to the docking station. Refer to the chart below to select the proper adapter for your particular iPod® model and insert that adapter into the docking station before connecting your iPod®. NOTE: No adapters are provided for the 5G (fifth generation) 30GB and 60GB iPod®s with video capability, and 2G (second generation) iPod® nano. Please use that adapters that were included with these iPod®s at time of purchase. They will fit properly into the docking station of this system. We have also included one flat adapter with no opening at all. This serves as a dust cover that can be inserted in the docking station if no iPod® will be connected to system for an extended period of time. "Docking Station Dust Cover. Install This Cover In The Docking Station If No iPod® Will Be Docked For An Extended Period of Time." Adapters nano (1G) nano (2G) 22 Connecting and Playing Your ‘Dockable’ iPod® (Refer To Separate Instructions For The iPod® Shuffle) IMPORTANT: To avoid any unwanted distortion when listening to your iPod® through the speakers of this system we recommend that you shut ‘Off’ the equalizer in the iPod® before inserting it in the docking station of this system. To shut off the iPod® equalizer, go to the “Main Menu” in your iPod® , scroll to the “Settings” menu, select the “EQ” setting and turn th...
Ce manuel est également adapté pour les modèles :Haut-parleurs - iP550 (2.22 mb)