Each of the jacks may be used as an input or a through connection. Speakon® connectors are recognized as the standard for professional installations, assuring a secure, permanent connection that won't corrode, vibrate loose or be easily tampered with. The 1/4" jacks are convenient. However, the Speakon® jacks are recommended when using power amplifiers over 150 watts, for permanent installations, or for the first enclosure among a number of daisy chained enclosures. Speakon® to 1/4" Wiring Diagram: 1- 1 + =P9 1- 1 + 1: 1/4" Input / Output Jacks 2: Speakon* Input / Output Jacks 3: High Frequency Horn Level Control Suggested Hookup Diagrams: TO SPEAKON FROM SPEAKON TO SPEAKON AMPEG SVT410HE 4X10 Bass Cabinet TECHNICAL SPECIFICATIONS: — TYPE 4x10” Bass Enclosure FREQ RESPONSE (+/-3dB) 60Hz-18kHz USABLE LOW FREQ (-10dB) 43 Hz *k ’ * m V—1 POWER HANDLING 500W RMS, 1000W Peak IMPEDANCE 8 Ohms CROSSOVER FREQUENCY 4000 Hz COMPONENTS Four 100W, 30 oz. magnet, low frequency drivers; one 1” high frequency horn DIMENSIONS (HxWxD)_25” x 24” x 16” CAUTION: THIS SPEAKER IS CAPABLE OF PRODUCING HIGH SOUND PRESSURE LEVELS CONTINUED EXPOSURE TO HIGH SOUND PRESSURE LEVELS CAN CAUSE PERMANENT HEARING IMPAIRMENT OR LOSS. USER CAUTION IS ADVISED, AND EAR PROTECTION RECOMMENDED IF UNIT IS OPERATED AT HIGH VOLUME. Ampeg continually develops new products, as well as improves existing ones. For this reason, the specifications and information in this manual are subject to change without notice. SENSITIVITY MAXIMUM SPL 122dB WEIGHT 91 lbs. 98dB SPL 1w/1m Speakon® is a registered TM of Neutrik AG Ampeg - The Power of Bass im /V S3L L 3 *...