Évaluations - 3, GPA: 3.7
(
)
)
|
Facilité d'utilisation
The 5-pin XLR type can be converted to the 3-pin XLR (2 channels) with the optional CCXA-53 audio cable. The ITT CANNON XLR-3-11-11 conversion adapter can be also used to convert to the 3-pin XLR. Menu Setup Menu Setup A menu is provided to set up the operating conditions of the unit. Menu items include basic items, items about the optional boards, items about the front panel, etc. For more information about menu items, see “ Menu List” (page 12). A “current bank” and 8 “menu banks” are provided with the unit. The current bank can be used to store current parameters. The menu banks can be used to store up to 8 sets of parameters. Saving/recalling frequently used parameters in/from menu banks allows faster setting up of the unit’s operating conditions. Initial Display Switching the power on causes the selected parameter of “15: IF OUT LEVEL” and “16: CARRIER” on the menu to appear in the display window. Changing the Parameters Follow the procedure below to change the parameters and save them in the current bank. 1,6 2,4 3,45 IN1 IN2 EXT 525 625 36M 18M 7/8 3/4 ALOG AEB/EBUSDI REF ALARM MENU ITEM RESET ENTER INPUT SEL FEC RATE FREQ BW SDI AUDIO VIDEO STD 1 Press the MENU button. The back lighting for the MENU button lights up, and the menu appears in the display window. 2 Select a menu item to be changed using the ITEM aor µbutton. 3 Change the parameters using the 4or $button. Use the Oor Obutton to move a digit to the left or right. 4 To change the parameters of other items, repeat steps 2 and 3. 5 Press the ENTER button. The changed parameters are saved in the current bank. The contents of the current bank are saved even after the power is turned off. To cancel changing parameters Press the MENU button before pressing the ENTER button. 6 Press the MENU button. The back lighting for the MENU button turns off, and the unit exits the menu. To return the contents of the current bank to the factory setting Follow the procedure below. 1 Press the MENU button. The back lighting for the MENU button lights up, and the menu appears in the display window. 2 Select “93: FACTORY SET” using the ITEM aor µbutton. 3 Press the ENTER button. The contents of the current bank return to the factory setting. To cancel returning to the factory setting Press the MENU, ITEM aor µbutton before pressing the ENTER button. 4 Press the MENU button. The back lighting for the MENU button turns off, and the unit exits the menu. Saving the Parameters in Menu Banks Menu banks are provided with the unit as well as the current bank. The menu banks can store the 8 sets of parameters saved in the current bank. Follow the procedure below to save the set of parameters in menu banks. 1,5 2 34 IN1 IN2 EXT 525 625 36M 18M 7/8 3/4 ALOG AEB/EBUSDI REF ALARM MENU ITEM RESET ENTER INPUT SEL FEC RATE FREQ BW SDI AUDIO VIDEO STD 1 Press the MENU button. The back lighting for the MENU button lights up, and the menu appears in the display window. 2 Select “91: SAVE BANK” using the ITEM aor µ button. 3 Select the number of the menu bank in which the contents of the current bank to be saved using the 4or $button. 4 Press the ENTER button. The contents of the current bank are saved in the selected menu bank. The contents of the menu bank are saved even after the power is turned off. To cancel saving in the menu bank Press the MENU, ITEM aor µbutton before pressing the ENTER button. 5 Press the MENU button. The back lighting for the MENU button turns off, and the unit exits the menu. Recalling the Parameters from Menu Banks Follow the procedure below to recall the set of parameters from the menu banks. 1,5 2 34 IN1 IN2 EXT 525 625 36M 18M 7/8 3/4 ALOG AEB/EBUSDI REF ALARM MENU ITEM RESET ENTER INPUT SEL FEC RATE FREQ BW SDI AUDIO VIDEO STD 1 Press the MENU button. The back lighting for the MENU button lights up, and the menu appears in the display window. 2 Select “92: RECALL BANK” using the ITEM A or µbutton. 3 Select the number of the desired menu bank to recall the contents into the current bank using the 4or $button. 4 Press the ENTER button. The contents of the selected menu bank are recalled to the current bank. To cancel recalling from the menu bank Press the MENU, ITEM aor µbutton before pressing the ENTER button. 5 Press the MENU button. The back lighting for the MENU button turns off, and the unit exits the menu. Menu Setup Menu List Menu items are classified as one of the following • Items about an optional board in the IN2 section on categories: the rear panel (50~) • Basic items (01~ and 10~) • Items about the front panel (80~) • Items about an optional board in the IN1 section on • Items about the saving and recalling functions (90~) the rear panel (40~) The parameters in bold print are factory settings. Item number Item Parameter Function 01 INPUT SELECT IN1 IN2 IN1&IN2 Selects either or both IN1 or IN2 section input signals to be transmitted from the IF OUT connector. IN1: The input signals from the optional board in the IN1 section are transmit...
Ce manuel est également adapté pour les modèles :Unité - DSM-T1 (312.44 kb)