3). Fig. 2 When PRE disappears from the display, the oven set temperature has been reached. Once the oven has preheated, PLACE FOOD IN THE OVEN. Press _To_ when baking is complete or to cancel the Preheat featu re. To change Preheat temperature while oven is preheating (example changing from 350 to 425°F): (f it is necessary to change the preheat temperature while the oven is preheating to the original set temperature: 1. While preheating, press @ again. (See Fig. 3) Fig. 4 2. Enter the new preh

ELI T E ® Gas ar e Estufa a as Models, Modelos 790.7942 *, 7944* * = color number, ntJmero de color Sears Roebuck and Co., Hoffman Estates, {L 60179 U.S.A. pin 316417324 (0606) Table of Contents Freestanding Range Warranty ................................................. 2 , Setting Preheat .................................................................. 21 IMPORTANTSAFETYINSTRUCTIONS..................................... 3-5 , Setting Bake .....................................................

Surfaces How to Clean Aluminum (Trim Pieces) Use hot, soapy water and a cloth or paper towel. Dry with a clean cloth. Painted and Plastic For general cleaning, use hot soapy water and a cloth. For more difficult soils and Control Knobs, Body Parts, built-up grease, apply a liquid detergent directly onto the soil. Leave on soil for 30 to and Decorative Trim 60 minutes. Rinse with a damp cloth and dry. DO NOT use abrasive cleaners on any of these materials; they can scratch or dull the finish. Sta

Location of the Radiant Surface Elements and Controls Figure 1 NOTE: Please read detailed instructions for ceramic glass cooktop cleaning in the General Care & Cleaning section and Before You Call checklist section of this Use and Care Guide. NOTE: Radiant elements have a limiter that allows the element to cycle on and off, even at the HI setting. This helps to prevent damage to the ceramic cooktop. Cycling at the HI setting is normal and will mostly occur if the cookware is too small for the ra