Évaluations - 4, GPA: 3.5
(
)
)
|
Facilité d'utilisation
Call key ( ) End key ( ) Menu key ( ) Multimedia key ( ) is a shortcut to multimedia content. Edit key ( ) opens a list of commands when you edit text. Clear key ( ) Zoom / Volume key Review key ( ) to view the last saved image or video clip 2-stage capture key ( ) 41071281195613123 2 15141718211213162019112215 15141718211213162019112215 141516171819202122 Power key Stereo speakers Main camera for (higher resolution) image capture and video recording Camera flash Infrared (IR) window Slide for camera protection, activation, and control. Memory card slot for a compatible miniSD card (sold separately) Charger connector Pop-Port™ connector for the USB data cable, headset, and other compatible enhancements Insert the (U)SIM card and battery Insert the (U)SIM card and battery S mobile phones. Keep all SIM cards out of the reach of small children. Always switch the device off, and disconnect the charger before removing the battery. 1. With the back of the device facing you, press the release button (1), slide the cover (2), and lift it up (3). 2. Slide the (U)SIM card into the holder (4). Make sure that the bevelled corner on the card is facing the base of the device, and that the contact area on the card is facing the connectors on the device. 4 3.3. 4. Replace the back cover. Switch the device on 1. Press and hold the power key ( ). 2. If the device asks for a (U)PIN code or lock code, enter it, and press . The factory setting for the lock code is 12345. Your device has two internal antennas. Note: As with any radio transmitting device, avoid touching an antenna unnecessarily when the antenna is in use. For example, avoid touching the cellular antenna during a phone call. Contact with a transmitting or receiving antenna affects the quality of the radio communication, may cause the device to operate at a higher power level than otherwise needed, and may reduce the battery life. When you switch on the device for the first time, it may prompt you to set the following information: Select current city:, Time:, and Date:. Use the scroll key and the number keys. To find the city, enter the first letters of the city name. The city you select also defines the time zone for the clock in your device. Your Nokia N73 normally has MMS, GPRS, streaming, and mobile Internet settings automatically configured in the device, based upon your service provider or network operator information. Your Nokia N73 normally has MMS, GPRS, streaming, and mobile Internet settings automatically configured in the device, based upon your service provider or network operator information. to open the main menu. Your service provider may have requested that certain features be disabled or not activated in your device. If so, they will not appear on your device menu. Your device may also have been specially configured. This configuration may include changes in menu names, menu order, and icons. Contact your service provider for more information. Keypad lock (keyguard) Use the keypad lock to prevent the keys from being accidentally pressed. To lock: In the standby mode, press , then . When the keys are locked, is shown on the display. To unlock: Press , then . When the keypad lock is on, calls may be possible to the official emergency number programmed into your device. To turn on the display light when the keypad lock is on, press . 6 Insert the memory card (sold separately) Insert the memory card (sold separately) You can purchase a compatible miniSD card as extra storage space to save the memory on your device. You can also back up information from your device to the memory card. Keep all memory cards out of the reach of small children. 1. To insert the memory card (1), place your nail in the recess below the door of the memory card slot, and open the door. 2. Insert the memory card in the slot (2). Make sure that the contact area on the card is facing up and towards the slot. 3. 3. 4. Close the door. You cannot use the memory card if the door is open. Eject the memory card 1. Before you eject the card, press , and select Remove mem. card. All applications are closed. 2. When Remove memory card and press ‘OK’ is displayed, open the door of the memory card slot. 3. Press the memory card to release it from the slot. 4. Remove the memory card. If the device is switched on, select OK. Important: Do not remove the memory card in the middle of an operation when the card is being accessed. Removing the card in the middle of an operation may damage the memory card as well as the device, and data stored on the card may be corrupted. Transfer content from another device To use the Data transfer application, see the user guide. 8 Nokia Content Copier is available in Nokia PC Suite to copy content from a compatible Nokia phone. See the CD-ROM supplied with your device. Nokia Content Copier supports several Nokia phone models. For more information on the devices supported by each Nokia PC Suite, refer to the pages. Nokia Content Copier is...