Log:
Évaluations - 2, GPA: 3.5 ( )

Instructions DeLonghi, Modèle KF8150M

Fabricant : DeLonghi
Taille : 212.4 kb
Nom Fichier : 73e03ed9-ad62-459d-a9ae-48042ea65c08.pdf
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


Using for the first time • Before using the appliance for the first time, wash all accessories thoroughly.Take care when handling the blades as they are sharp.Wipe the motor base with a damp cloth • Never immerse the motor base in water! • Check that the mains supply voltage corresponds to the voltage indicated on the rating plate. Using the Blender • Place the appliance on a dry flat surface. DO NOT PLUG THE APPLIANCE INTO THE MAINS UNTIL ALL ACCESSORIES HAVE BEEN CORRECTLY FITTED. •Place the blender jar on the motor base. •Pour the ingredients into the jar. This may be done by: 1. Removing the entire lid by rotating anticlockwise; 2. using the lid without the measuring cup; 3. using the fruit tray inserted upside down in the hole in the lid (fig. 1). • The appliance is supplied with a handy measuring cup with a useful hole for adding, for example, drops of flavouring or essence without opening the lid (fig. 2). If you turn the measuring cup upside down and close the hole, it can also be used as a measure for oil or similar. (see fig. 3). Important: Never use the appliance for more than 3 minutes consecutively. Pause for 3 minutes and continue to use for a maximum of five cycles. The appliance must then be left to cool down. • Cut solid food into cubes and add water. • Place the lid on the jar and rotate clockwise until the safety device on the handle of the jar clicks into place.The blender will not function if the lid is not correctly positioned on the jar. • Plug into the mains. •To start processing the ingredients, just turn the ON/OFF knob to the desired speed (1/2/3).When the ingredients have reached the required consistency, turn the knob back to the (0 ) position. • On the "P" position, the blender operates at maximum speed, improving control for short periods of processing. • Before cleaning, always unplug from the mains. 3 Blender KF8150 Fig.1 Fig.2 Fig.3 Open Lock Fig.4 Fig.5 Open Lock Fig.4 Fig.5 Fig.6 Using the "P" function The "P" (pulse) function improves control for short periods of processing. The appliance functions as long as the knob is kept in the "P" position. Cleaning the appliance NEVER IMMERSE the motor base in water! Make sure the appliance is unplugged from the mains socket. • Remains of the ingredients being processed must be removed with a spatula. In models with a plastic blender jar, use a rubber spatula to avoid scratching the surface. •Pour lukewarm water into the blender jar, filling to the halfway point. Operate the appliance for a few seconds then empty the jar. Repeat the operation if possible. • Remove the blender jar, lid and measuring cup and wash in lukewarm water. Rinse and dry thoroughly. •To facilitate cleaning, in certain models the blade unit can be removed as follows: 1. Remove the jar from the base and turn it upside down. 2. Insert the hooks on the end of the measuring cup into the notches on the bottom of the upturned jar (see fig. 4). 3. Turn the measuring cup clockwise (fig. 5) as far as it will go then pull until the blade unit is released (fig. 6). 4. Wash, dry, then reassemble, taking care to replace the gasket correctly. Position the blade unit on the bottom of the jar, pressing down until it fits in place, then use the measuring cup to rotate the blade unit anticlockwise as far as it will go. The blender jar and all plastic components must not be washed in the dishwasher or in boiling water. •Take care when handling the glass jar to avoid violent impact. • Clean the motor base and power cable with a damp cloth or sponge. Dry thoroughly with a soft cloth. • Wrap the power cable carefully around the bottom of the motor base. Suggestions for use 1 General • In order to get results and not risk that the ingredients spill out of the blender jar, add the ingredients to the jug a little at a time. • Do not fill the jar more than full – the movement of the blades will increase the volume of the ingredients in the jug. The recipes which use large quantities of ingredients should be processed in batches. 4 Blender KF8150 •Pour in the liquid ingredients before the solid ones, as long as the recipe doesn’t say otherwise. The liquid will facilitate the processing and will allow for the use of lower speed. Always add a cup of water before processing ice. • Blend for 5 – 30 seconds and then check the consistency. Continue to process the ingredients in this way until the desired consistency is obtained. Be sure to not process the ingredients too much; this would cause a loss of consistency to the entire recipe. •Always use the blender with the lid well inserted. • DO NOT remove the blender jar from the motor housing while the appliance is in use. • In order to avoid the possibility of injury to the user or damage to the appliance, do not insert hands or utensils into the jar while the appliance is operating. It is possible to utilise a spatula while the appliance is turned off. 2 Solid ingredients • It is necessary to pay particular attention during the processing o...


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories