Log:
Évaluations - 2, GPA: 3.5 ( )

Instructions Samsung, Modèle HT-E4200

Fabricant : Samsung
Taille : 2.83 mb
Nom Fichier :
Langue d'enseignement: en
Aller à la télécharger



Par ce dispositif a également d'autres instructions :
Blu-Ray - HT-E4200 (7.51 mb)frdenlfi
Blu-Ray - HT-E4200 (9.83 mb)itenfrde
Blu-Ray - HT-E4200 (9.74 mb)itesfrptfica

Facilité d'utilisation


2:13:42 ConnectionsConnections This section describes various methods of connecting the product to other external components. Before moving or installing the product, be sure to turn off the power and disconnect the power cord. Connecting the Speakers Front (L) Front (R) Product Subwoofer Position of the product Place it on a stand or cabinet shelf, or under the TV stand. Selecting the Listening Position The listening position should be located about 2.5 to 3 times the distance of the TV's screen size om the TV. For example, if you have a 46 inch screen, locate the listening position 2.92 to 3.50 om the screen. 03 Connections ont of your listening position, facing inwards (about 45°) ont speakers so that their tweeters will be at the same e you like. Speaker Components HT-E4200 HT-ES4200 SUBWOOFERFRONT (L) (R) SUBWOOFER SPEAKER CABLE FRONT PARTITION STAND BASE SCREW (2EA) (L) (R) English 15| HT-E4200_XU_0224.indd 15 2012-02-24 .. 11:20:04 .. 11:20:04.. 11:20:04 | 16 English Connections Installing the Speakers (HT-ES4200 Only) You can install to use 4 types that described on the right side. Type 1. You can assemble the speakers as a bar form and use the hole on the rear of the speaker to hang it up on the wall. Type 2. You can assemble the speakers as a bar form and put it on the table to use. Type 3. You can assemble the speakers as a stand form and put it on the table or floor to use. Type 4. You can assemble the speakers as a stand form and use the hole on the rear of the speaker to hang it up on the wall. | NOTE | However, if you install the speakers on the wall, installation service or accessories (screws or nails) are not provided from the company. 1 2 3 4 HT-E4200_XU_0223.indd 16 2012-02-24 .. 2:14:00 Assembling the Front Speaker (HT-ES4200 Only) You can install the product in one of the following two ways: Choose a desired one according to the installation area and your decoration plan. Installing on the Partition The front speakers can be combined by a partition. 1. Connect the left/right speakers to thePartition. 2 1 3 Partition 03 Connections 2. Insert screws into the hole on the rear of each speakers, and then use screwdriver to tighten screws clockwise. 3. This is the appearance after the speaker isinstalled. Installing on the Table Stand 1. Connect the Speaker to the Stand Base. 2. Insert a screw into the hole on the rear of the speaker, and then use screwdriver to tighten a screw clockwise. 3. This is the appearance after the speaker isinstalled. Follow this steps to install otherspeaker. 21 3 Speaker Stand Base English 17| HT-E4200_XU_0223.indd 17 2012-02-24 .. 2:14:09 Connections Connections Connecting The Speakers (HT-ES4200 Only) 1. Match the front speaker cable bundle to the correct speaker by matching the colour coded plug on each bundle to the coloured sticker on the bottom of the front speaker. 2. To attach speaker wire to the front speaker: a. Press down the red tab on the back of the front speaker, insert the red wire, and then release the tab. b. Press down the black tab on the back of the front speaker, insert the black wire, and then release the tab. 3. Connect the speaker wire plugs to the back of the product by matching the colours of the front speaker plugs to the colours of the front speaker jacks. In case of HT-E4200 Black Red 5V 350mA LAN WIRELESS LAN HDMI IMPEDANCE : 3 .. SPEAKERS OUT FRONT L SUBWOOFER FRONT R IMPEDANCE : 3 .. SPEAKERS OUT FRONT L SUBWOOFER FRONT R Front Speaker (L) Front Speaker (R) Subwoofer Refer to page 15 for the speakers of HT-ES4200. | CAUTION | . If you want to install the product on the wall, fasten the screws or nails on the wall firmly and use the holes on the rear of speaker to install. However, when you install it, accessories (nails or screws) and installation is not provided by the company. . Do not let children play with or near the speakers. They could get hurt if a speaker falls. . Keep the subwoofer speaker out of reach of children to prevent children from inserting their hands or alien substances into the duct (hole) of the subwoofer speaker. . Do not hang the subwoofer on the wall through the duct (hole). | NOTE | . If you place a speaker near your TV set, the screen colour may be distorted because of the magnetic field. | 18 English 1 HT-E4200_XU_0223.indd 18 2012-02-24 .. 2:14:18 English 19 | 03 Connections Connecting the FM Antenna 5V 350mA LAN WIRELESS LAN HDMI OUT AUX IN VIDEO OUT OPTICAL DIGITAL AUDIO IN L R IMPEDANCE : 3.. SPEAKERS OUT FRONT L SUBWOOFER FRONT R FM ANT FM Antenna (supplied) 1 . Connect the FM antenna supplied to the FM ANTENNA Jack. 2 . Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface. | NOTE | This product does not receive AM broadcasts. Connecting to an iPod/iPhone Connect an iPod/iPhone using the USB cable to the front USB port. 5V 500mA Attaching the Toroidal Ferrite Core to the Power Cord of the Main Unit If you attach a T...

Ce manuel est également adapté pour les modèles :
Blu-Ray - HT-ES4200 (2.83 mb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories