Évaluations - 5, GPA: 3.8
(
)
)
|
Facilité d'utilisation
Take off the cap and plug in the optical cable. Note that you cannot use the fade in or out (page 16) functions when using this connection. POC-15 Optical cable (not supplied) CD player Digital component DIGTAL OUT OPTICAL DIGITAL INPUT OPTICAL Note When you connect via the DIGITAL OUT (OPTICAL) connector, noise may occur when you play CD software other than music, such as a CD-ROM. If you have a Sony component with the CONTROL A1 jack Connect the component via the CONTROL A1 jack. You can simplify the operation of audio systems composed of separate Sony components. For details, refer to the supplementary “S-LinkTM/CONTROL-A1 Control System” instructions. When using another Sony CD player together with this player You can make the supplied remote so that it is effective only for this player. • When using a player equipped with the COMMAND MODE selector: Set the command mode selector of this player to CD1 (Factory preset position) and that of another player to CD2 or CD3. Then set the CD 1/2/3 switch on the remote supplied for each player accordingly. • When using a player not equipped with the COMMAND MODE selector: The command mode of the player without the COMMAND MODE selector is set to CD 1. Set the COMMAND MODE selector of this player and the CD 1/2/3 switch on the remote to CD 2 or CD 3. Setting the voltage selector (voltage selector equipped models only) Check that the voltage selector on the rear panel of the player is set to the local power line voltage. If not, set the selector to the correct position using a screwdriver before connecting the AC power cord to a wall outlet. 220 - 240 V 110 - 120 V Connecting the AC power cord Connect the AC power cord to a wall outlet. Transporting the player Before transporting the player, follow the procedure below to return the internal mechanisms back to their original position. 1 Remove all the discs from the disc tray. 2 Press ¤OPEN/CLOSE to close the disc tray. “–NO DISC–” appears in the display. 3 Wait for 10 seconds, then press 1/uto turn off the player. Basic Operations Basic Operations Playing a CD 2 5 463 1 2 3 DISC 4 5 1 2 3 4 5 6 7 8 9 10 10 LINE OUT PHONE LEVEL CONTINUE SHUFFLE PROGRAM PHONES 0 10 TIME/TEXTREPEAT DISC SKIP OPEN/CLOSE I / u · See pages 4 – 5 for the hookup information. Connect the heaphones. 1 1 Turn on the amplifier and select the CD player position so that you can listen to the sound from this player. 2 2 Press 1/uto turn on the player. 3 With the label side up Disc number Press ¤OPEN/CLOSE, and place a disc on the disc tray. 4 To place other discs, press DISC SKIP and place the discs in the order you want to play. Each time you press the button, the disc tray turns and you can place the discs in the empty disc compartments. The player plays the disc in the loading position first. 5 Press CONTINUE to select ALL DISCS or 1 DISC Continuous Play mode. Each time you press the CONTINUE button, “ALL DISCS” or “1EDISC” appears in the display. When you select The player plays ALL DISCS All discs in the player consecutively in the order of disc number 1EDISC Only the disc you have selected 6 Basic Operations Basic Operations Basic You can select the disc you want to start playing first Press one of the DISC 1 – 5 buttons. You can adjust the output level to the amplifier Z Press LINE OUT LEVEL +/– on the remote. You can reduce the output level up to –20EdB. When you reduce the output FADE level, “ ” appears in the display. The headphones volume will also change when you adjust the output level. Note If you press the LINE OUT LEVEL +/– buttons on the remote while recording, the recording level will change even when it is preset on the tape deck, etc. 6 6 Press ((the indicator lights up green). The disc tray closes and the player plays all the tracks once (Continuous Play). Adjust the volume on the amplifier. To stop play Press p. ¤OPEN/ DISC 1 – 5 DISC SKIP ( CLOSE pP1 2 3 DISC 4 5 1 2 3 4 5 6 7 8 9 10 10 LINE OUT PHONE LEVEL CONTINUE SHUFFLE AMS PROGRAM PHONES 0 10 TIME/TEXTREPEAT DISC SKIP EX-CHANGE OPEN/CLOSE I / u AMS ± To You need to Pause Press P (The indicator lights up orange.) Resume play after pause Press P or ( Go to the next track Press ± Go back to the preceding track Press . Go to the next disc Press DISC SKIP Select a disc directly Press DISC 1 – 5 Stop play and remove the CD Press § OPEN/CLOSE 7 Playing CDs Playing CDs Display information while playing a disc Using the Display While playing a disc, the display shows the current disc number, current track number, playing time of the You can check information about the disc using the track, and the music calendar. display. I / u TIME/TEXT AMS ± TIME/TEXT ENTER INPUT HIGHLIGHT =/+ Checking the total number and playing time of the tracks Press TIME/TEXT before you start playing. The display shows the current disc number, the total number of tracks, total playing time, and music calendar. Current disc number Total playing time Total number of tracks Music calendar 12 3 4 5 67 8 9...