Évaluations - , GPA: ( )

Instructions Breitling, Modèle 3798

Fabricant : Breitling
Taille : 921.36 kb
Nom Fichier :

Langue d'enseignement:

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

To use the countdown timer Press D while in the Countdown Timer Mode to start the countdown timer. • The countdown timer operation continues even if you exit the Countdown Timer Mode. • Press D while a countdown operation is in progress to pause it. Press D again to resume the countdown. • To completely stop a countdown operation, first pause it (by pressing D), and then press A. This returns the countdown time to its starting value. Stopwatch The stopwatch lets you measure elapsed time, split times, and two finishes. • The display range of the stopwatch is 59 minutes, 59.99 seconds. • The stopwatch continues to run, restarting from zero after it reaches its limit, until you stop it. • The stopwatch measurement operation continues even if you exit the Stopwatch Mode. • Exiting the Stopwatch Mode while a split time is frozen on the display clears the split time and returns to elapsed time measurement. • All of the operations in this section are performed in the Stopwatch Mode, which you enter by pressing C. Seconds Minutes 1/100 second Split indicator Split indicator Module 3358 Module 3368 Module 3798 To measure times with the stopwatch Elapsed Time Start Stop Re-start Stop Clear Start Split (Split indicator displayed) Split release Stop Clear Start Split Stop Split release Clear Split Time Two Finishes First runner finishes. Display time of first runner. Second runner finishes. Display time of second runner. 3 Operation Guide 3358/3368/3798 Alarms You can set five independent Daily Alarms. When an alarm is turned on, the alarm tone sounds when the alarm time is reached. One of the alarms is a snooze alarm, while the other four are one-time alarms. You can turn on an Hourly Time Signal that causes the watch to beep twice every hour on the hour. • There are six screens in the Alarm Mode. Four are for one-time alarms (indicated by numbers from AL1through AL4), one is for a snooze alarm (indicated by SNZ), and one is for the Hourly Time Signal (indicated by SIG). • All of the operations in this section are performed in the Alarm Mode, which you enter by pressing C. To set an alarm time 1. In the Alarm Mode, use D to scroll through the alarm screens until the one whose time you want to set is displayed. • To set a one-time alarm, display one of the screens indicated by an alarm number from AL1through AL4. To set the snooze alarm, display the screen indicated by SNZ. • The snooze alarm repeats every five minutes. 2. After you select an alarm, hold down A until the hour setting of the alarm time starts to flash, which indicates the setting screen. • This operation automatically turns on the alarm. 3. Press C to move the flashing between the hour and minute settings. 4. While a setting is flashing, use D (+) and B (–) to change it. • When setting the alarm time using the 12-hour format, take care to set the time correctly as a.m. (no indicator) or p.m. (P indicator). 5. Press A to exit the setting screen. Alarm Operation The alarm sounds at the preset time for about 20 seconds, regardless of the mode the watch is in. In the case of the snooze alarm, the alarm operation is performed a total of seven times, every five minutes, or until you turn the alarm off. • Alarm and Hourly Time Signal operations are performed in accordance with the Timekeeping Mode digital time. • To stop the alarm tone after it starts to sound, press any button. • Performing any one of the following operations during a 5-minute interval between snooze alarms cancels the current snooze alarm operation. Displaying the Timekeeping Mode setting screen Displaying the SNZ setting screen To test the alarm In the Alarm Mode, hold down D to sound the alarm. To turn an alarm on and off 1. In the Alarm Mode, use D to select an alarm. 2. Press A to toggle it on (ON displayed) and off (OF displayed). • Turning on a one-time alarm (AL1through AL4) causes the alarm on indicator to appear on its Alarm Mode screen. In all other modes, the alarm on indicator is displayed when one or more of the alarms is turned on. • Turning on the snooze alarm (SNZ) displays the alarm on indicator and snooze alarm indicator on the Alarm Mode snooze alarm screen, and in all other modes. • The alarm on indicator flashes while the alarm is sounding. • The snooze alarm indicator flashes during the 5-minute intervals between alarms. Snooze alarm indicator Snooze alarm indicator On/Off status Alarm on indicator Alarm on indicator Module 3358 Module 3368 Module 3798 To turn the Hourly Time Signal on and off 1. In the Alarm Mode, use D to select the Hourly Time Signal (SIG). 2. Press A to toggle it on (ON displayed) and off (OF displayed). • The Hourly Time Signal on indicator is shown on the display on the Alarm Mode Hourly Time Signal screen, and in all other modes while the Hourly Time Signal is turned on. On/Off status Hourly time signal on indicator Module 3358 Module 3368 Module 3798 Alarm number Alarm time (Hour : Minutes) On/Off status Illumination This watch has an EL (electr...