Take the time to carefully read these operating instructions. USER INSTRUCTIONS Channel number/ Outside temperature/Humidity A Graphical Indoor thermometer Weather report symbols Clock; Clock Alarm Inside temperature; Outside temperature/ humidity display; Min/ Max record; Temperature Alarm Temperature trend indicator Outside channel Features: Block with main display: • Clock with choice of time display format (12 or 24 hour) • Indoor and outdoor temperature display • Graphical displa

Follow all warnings and operating recommendations in this manual. Keep this manual for future reference. /*\ ATTENTION! /*\ / ■ \ Risk of electric shock! DO NOT OPEN! Warning: To prevent fire or shock hazard do not expose the appliance to rain or moisture. To prevent shock hazard do not remove the cover yourself. Apply to a service centre for repair and maintenance. A This lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence

Then press the Reset button (17) using a ball-point pen. The clock is equipped with a back-up power element consisting of a flat lithium battery of 3V. Insert the battery to its compartment observing the right polarity towards the terminals located in the compartment. NOTE: When the main power supply is cut off, the clock automatically gets powered from the battery, keeping the memory data and time. When the main power supply is resumed, the clock switches back to the AC power. Attention If y

auf brennende Kerzen zu stellen. • Beim Auffinden von Fehlern wenden Sie sich an ein autorisiertes Service-Center. UHR • Öffnen Sie des Deckel des CD-Faches, öffnen Sie den Batteriefachdeckel (26) und legen Sie eine Batterie Typ 6F-22 mit Spannung 9V (nicht im Lieferumfang enthalten). Die Batterie wird für die Speicherung von Informationen in der Echtzeit und der eingestellten Alarmzeit des Weckers verwendet, wenn die Netzstromzufuhr unterbrochen wird. • Stellen Sie den Schalter Auto/Off/On

The year digits start blinking. You can set them by pressing UP or DOWN key. UU~(3B D jll i ss ' гlвr -Press MODE key again. The month digits start blinking. You can them set by pressing UP or DOWN key. [ 009s < • f 9 86' ¿w -Press MODE key once more. The date digits start blinking. You can set them by pressing UP or DOWN key. 0 n ¿5 06Y ?26T -Press MODE key once more. The hour digits start blinking. You can set them by pressing UP or DOWN key. )

Power connection Plug AC power cord to outlet AC source. The unit is equipped with the battery back up system too. It requires 3 x 3Volt CR 2025 flat lithium batteries (not included). Insert the battery in the battery compartment, making certain that the positive and negative (+and-) battery terminals are attached to correspond terminals on the plate in the battery compartment. If an AC power failure occurs, the clock automatically switches to the battery power supply. The clock and the timer

Or you can remove the stand and mount the unit on a wall using the recessed screw hole. GETTING STARTED 1. SETTING UP THE BAROMETER a. When batteries are installed, the display will shows the “hPa”, “mBar” and “mmHg”. User should press the “Unit” key to the unit of pressure, it will shows “0” and “meter”. User can use the “Up” or “Down” keys to change to “feet”, or use the “Unit” key to confirm the unit. b. After user confirmed the unit of height, it will shows “10” with “meter” or “32” wit

The battery is used to save information regarding the current time and alarm settings in case of AC power interruption. • Set the AUTO/OFF/ON (1) selector to the Off position and plug the power plug into the outlet; the display will start to blink. • To set the current time, press and hold the TIME (6) button, then use the HOUR (10) and MIN (9) buttons to set the current time. SETTING THE PROJECTED TIME • To project the current time onto the wall, point the projector away from itself and int

The clock will automatically search the radio signal. It takes about 3-5 minutes to finish this process. Selecting Temperature/Alarm 1/Alarm 2/Dual time Display • Press MODE will display the ALARM1 time: Selecting Temperature/Alarm 1/Alarm 2/ Dual time Display • Press MODE will display the ALARM 1 time: • Press MODE again will display the Alarm 2 time: • Press MODE again will display the Dual Time: • Press MODE again will display the Temperature: 5 26.05.2006 12:09:26 e?3G » 19 HFPl

Please take the time to read and understand this manual so you can begin to enjoy the convenience and features this product has to offer. The unit is a weather station device that has several weather related functions. The main features are: FEATURES Main Display Unit: • dual clock and dual alarm • calendar (month/day/date) • local temperature display • receives and displays temperature and humidity readings from up to 3 remote transmitters via RF technology of 433MHz • minimum and maxim