Read all of the instructions before using this appliance. 2. Use this appliance only for its intended purpose as described in this User's Manual. 3. This cabinet must be properly installed in accordance with the installation instructions before it is used. See grounding instructions in the installation section. 4. Never unplug your cabinet by pulling on the power cord. Always grasp the plug firmly and pull straight out from the outlet. 5. Unplug your cabinet before cleaning or making any repairs

2) Use this appliance only for its intended purpose as described in this use and care guide. 3) This entertainment center must be properly installed in accordance with the installation instructions before it is used. See grounding instructions in the installation section. 4) Never unplug your entertainment center by pulling on the power cord. Always grasp the plug firmly and pull straight out from the outlet. 5) Repair or replace immediately, all electric service cords that have become frayed or

6. Attach the base bracket to the opposite side 7. Install the bottom pivot aligning with the lower pivot insert on the door. Attach the 3 hexagonal screws to base bracket. 8. Remove tape. 9. As the unit was tilted, wait 24 hours before plugging it in. English 5 Entertainment Center Features & Use General Features Adjustable Temperature Dial: (location varies per model) Your entertainment center will automatically maintain the temperature level you select. The temperature control dial has 3 sett

2. Inspect and remove any remaining packaging, tape or printed materials before turning on the beer dispenser. Note: Allow the beer dispenser to stand in an upright position for 2 hours before turning on the power. Check all supplied accessories in the carton to be sure that all pieces are present and in good condition. A checklist of accessories is listed below for your reference. If you find any accessories that are not in good condition or are missing, please contact our customer service depa

When using this appliance, always exercise basic safety precautions, including the following: 1. Use this appliance only for its intended purpose as described in this operation manual. 2. This appliance must be properly installed in accordance with the installation instructions before it is used. See the installation section for more details. 3. This appliance must be connected to a proper electrical outlet with the correct electrical supply. 4. Proper grounding must be ensured to reduce the ris

136527colderOff4 HVCE15A • Once you have plugged the unit into an electrical outlet, let the unit run for at least 30 minutes to acclimate itself before making any adjustments. During this time the Red Wine light will stay on. Temperature inside the cooler, if not adjusted, will be at 55°-60°F. • The wine cellar can be set to any temperature you desire to accommodate your wine storage requirements. To set the temperature, press both the "White Wine" and "Red Wine" buttons simultaneously and hold

2. To remove the light bulb cover use a philliphead screw driver to remove the 2 screws. 3. Make sure the light bulb is cool before removing it. Replace using a 10 watts light bulb. 4. After the bulb is secure, install the light bulb cover and replace both the screws. 5. Turn unit on to its original setting after plugging in the power cord. PROPER WINE CELLAR CARE AND CLEANING CLEANING AND MAINTENANCE Warning: • To avoid electric shock always unplug your wine cellar before cleaing. Ignoring this

The wine cellar door will close easier when the leveling legs are extended. Electrical Requirements • Make sure there is a suitable power outlet (115 volts, 15 amps outlet) with proper grounding to power the wine cellar. • Avoid the use of three plug adapters or cutting off the third grounding in order to accommodate a two plug outlet. This is a dangerous practice since it provides no effective grounding for the wine cellar and may result in shock hazard. Use of Extension Cord • Avoid the use of

This warranty gives you specific legal rights, and you may have other rights, which vary, from state to state. Haier America New York, NY 10018 12 Francais MESURES DE SECURITE Lire l’ensemble des instructions avant d’utiliser l’appareil. Lors de l’utilisation de cet appareil, prendre toutes les mesures de securite de base, y compris les suivantes: 1) N’utiliser cet appareil que pour l’usage pour lequel il est prevu, tel qu’il est indique dans le guide d’utilisation et d’entretien. 2) Ce refriger

Hole Cover 13. Upper Hinge Axes Bushing 14. Door Bushing 15. Axis Bushing Screw 16. Lower Hinge Axes Bushing 17. Handle 18. Spring Gasket 19. Flat Gasket 20. Handle Screw 1. Remove the screw cover from the upper hinge cover. Use a Phillips head screwdriver to remove the screw that holds the upper hinge cover in place. Remove the upper hinge cover. Loosen and remove the screws that hold the upper hinge in place. Note: Make sure you hold door to prevent it from falling or being damaged. Lift and s