Évaluations - 2, GPA: 4
(
)
)
|
Facilité d'utilisation
• The system cannot output the audio signal of the connected TV. When you listen to the audio signal of the TV by using the connected speakers, input the audio signal of the TV from the AUDIO IN L/R jack. When connecting to a standard 4:3 screen TV Depending on the disc, the image may not fit your TV screen. If you want to change the aspect ratio, please refer to page 64. Connecting a VCR to the system Connect the VCR to the VIDEO IN and AUDIO IN L/R jacks of the system. Be sure to make the connections securely to avoid hum and noise. If using VIDEO1 distorts the sound, reconnect the VCR to VIDEO2. To listen to the TV or game machine (ex: PlayStation 2) sound by using the system Connect the audio output jacks of the TV or game machine to the VIDEO 2 AUDIO IN jacks of the system with the audio cords (optional). continued 19GB Notes • Do not connect the system to a VCR. If you pass video signals from the system via a VCR, you may not receive a clear image on the TV screen. • If you cannot view the picture from a VCR through this system which is connected to a TV with RGB component jacks, set to t (Audio/Video) on your TV. If you select (RGB), the TV cannot receive the signal from the VCR. • If you want to use your VCR’s SmartLink function, connect the VCR to your TV’s SmartLink jack. • The SmartLink function may not work properly if your VCR is connected to your TV via this system. • The system does not output S video signals. • When you select “DVD” by pressing FUNCTION (page 56), the video signal and RGB signal are not output from the VIDEO IN jacks. Also, the system cannot output the component video signal. • When you select VIDEO 1 or VIDEO 2 by pressing FUNCTION (page 56), the audio signal from the AUDIO L/ R jack is output to the connected speakers. The audio signal is not output from the T EURO AV OUTPUT (TO TV) jack. Step 4: Connecting the Mains Leads Before connecting the mains leads of this system and subwoofer to a wall outlet, connect the speakers to the system (see page 13). 20GB About magnetically shielded Speaker Setup speakers (to prevent colour irregularity occurring on the TV For the best possible surround sound, all the speakers other than the subwoofer should be the same distance from the listening position (A). However, this system allows you to place the centre speaker up to 1.6 metres closer (B) and the surround speakers up to 4.6 metres closer (C) to the listening position. The front speakers can be placed from 1.0 to 7.0 metres (A) from the listening position. Place speakers as illustrated below Note Do not place the centre and surround speakers farther away from the listening position than the front speakers. screen) The subwoofer in this system is magnetically shielded to prevent magnetic leakage. However, some leakage may occur, as a high-strength magnet is employed. If the subwoofer is used with a CRT-based TV or projector, install the subwoofer at least 0.3 metre from the TV set. If it is installed too close, colour irregularity may occur on the screen. If colour irregularity occurs, turn off the TV set once, then turn it on after 15 to 30 minutes. If colour irregularity occurs again, place the subwoofer farther away from the TV set. If colour irregularity still occurs after performing the above, make sure that no magnetic object is placed near the subwoofer. Colour irregularity may occur as a result of interaction between the subwoofer and the magnetic object. Examples of possible sources of magnetic interference include: magnetic latches on a TV stand, etc., healthcare devices, toys, etc. Specifying the speaker parameters To obtain the best possible surround sound, first specify the distance of the speakers from your listening position, then set the level and balance. Use the test tone to adjust the speaker level and balance to the same level. Select “SPEAKER SETUP” in the setup display. For details, see “Setting for the Speakers” (page 66). Getting Started 21GB Playing Discs Playing Discs Playing Discs Playing Discs Depending on the DVD or VIDEO CD, some operations may be different or restricted. Refer to the operation details supplied with your disc. Adjust the Disc slot AH volume FUNCTION Connect headphones "/1/ STANDBY indicator "/1 FUNCTION H 1 Turn on your TV. 2 Switch the input selector on the TV to this system. 3 Press "/1 on the system. The system turns on. Unless the mode of the system is set to “DVD,” press FUNCTION to select “DVD.” “READY!” appears in the front panel display and the system is ready for loading the disc. 4 Press POWER on the subwoofer. The subwoofer turns on. 5 Load a disc. Push the disc into the disc slot until the disc is pulled in automatically. The disc is drawn into the system automatically and “READING” appears in the front panel display. With the playback side facing down 6 Press H. The system starts playback (continuous play). Adjust the volume on the system. After following Step 6 Depending on the disc, a menu may appear on the TV screen. Yo...