Évaluations - 3, GPA: 4
(
)
)
|
Facilité d'utilisation
Control range: 0 ms* to 160 ms Control step: 1 ms ¦ Maximum volume MAX VOL. Use this feature to set the maximum volume level regardless of the original volume range. This feature is useful to avoid the unexpected loud sound. Control range: +16 dB*, +10 dB to –30 dB Control step: 5 dB Note • The “MAX VOL.” setting takes priority over the “INI.VOL.” setting. For example, if “INI.VOL.” is set to –20 dB and “MAX VOL.” is set to –30 dB, the volume level is automatically set to –30 dB when you turn on the power of this unit next time. ¦ Initial volume INI.VOL. Use this feature to set the volume level when the power of this unit is turned on. Choices: Off*, –80 dB to +16 dB Control step: 1 dB Note • The “MAX VOL.” setting takes priority over the “INI.VOL.” setting. 2 INPUT MENU Use this menu to reassign the input jacks, select the input mode or rename the input source. y • Initial settings are indicated by (*) in this following each parameter. Input assignment A)INPUT ASSIGN Use this feature to assign the input jacks according to the component to be used if the initial settings of this unit do not correspond to your needs. Choices: CD, MD/CD-R, DVD, DTV/CBL, V-AUX, DVR Initial setting: IN (1) (COAXIAL jack): DVD IN (2) (OPTICAL (DTV/CBL) jack): DTV/CBL IN (3) (OPTICAL (CD) jack): CD Notes • You cannot select a specific item more than once. • You cannot assign the same input source to both “IN (2)” and “IN (3).” For example, you assign “CD” to “IN (2),” “–––” appears in “IN (3).” • Once the input jacks are reassigned, you can select the corresponding component by using NINPUT l / h (or the input selector buttons (e) on the remote control). 34 En Set menu Input rename B)INPUT RENAME Use this feature to change the name of the input source that appears on the front panel display. The following is an example where “DVD” is renamed “My DVD.” DVR pDVD CDV-AUX DTV/CBL MD/CD-R TUNER DVD My DVD 1 Press one of the input selector buttons (e) or fMULTI CH IN to select the input source you want to change the name of. 2 Press ol / h on the remote control to place the “_” (underscore) under the space or the character you want to edit. 3 Press ok / n to select the character you want to use and then press ol / h to move to the next space. Notes • You can use up to 8 characters for each input. • Press on to change the character in the following order, or press ok to go in the reverse order: A to Z, a space, 0 to 9, a space, a to z, a space, symbols (#, *, –, +, etc.) 4 Repeat steps 1 through 3 to rename each input source. 5 Press kMENU to exit from “INPUT RENAME.” Volume trim C)VOLUME TRIM Use this feature to adjust the level of the signal input at each jack. This is useful if you want to balance the level of each input source to avoid sudden changes in volume when switching between input sources. Press one of the input selector buttons (e) or vMULTI CH IN to select the input source you want to adjust the level. Choices: CD, TUNER, MD/CD-R, DVD, DTV/CBL, V-AUX, DVR, MULTI CH IN Control range: –6.0 dB to 0.0 dB* to +6.0 dB Control step: 1.0 dB Decoder mode D)DECODER MODE ¦ Decoder select mode Use this feature to designate the default decoder mode for the input sources connected to the DIGITAL INPUT jacks. Choice Function AUTO* Automatically detect the type of input signals and selects the appropriate decoder mode. LAST Automatically select the last decoder mode used the connected input source. ¦ DTS decoder prioritize setting Choice Function AUTO* Automatically detect the type of input signals and selects the appropriate input mode. DTS Enables to playback a DTS-CD. Multi channel input setup E)MULTI CH SET ¦ BGV BGV Use this feature to select the video source played in the background of the sources input from the MULTI CH INPUT jacks. Choices: LAST*, DVR, V-AUX, DTV/CBL, DVD y • Select “LAST” to set this unit to automatically select the last selected video source as the background video source. 3 OPTION MENU Use this menu to adjust the optional system parameters. y • Initial settings are indicated by (*) in this following each parameter. Display settings A)DISPLAY SET ¦ Dimmer DIMMER Use this feature to adjust the brightness of the front panel display. Control range: –4 to 0* Control step: 1 • Press ol to make the front panel display dimmer. • Press oh to make the front panel display brighter. Memory guard B)MEMORY GUARD ¦ Memory guard MEM.GUARD Use this feature to prevent accidental changes to DSP program parameter values and other system settings. Choice Function OFF* Turns off the “MEM.GUARD” feature. ON Protects: – sound field program parameters – all set menu items – SCENE template parameters ADVANCED OPERATION English 35 En Set menu Note • When “MEM.GUARD” is set to “ON,” you cannot select and adjust any other set menu items. Audio select C)AUDIO SELECT Use this feature to designate the default audio input jack select setting for the input sources. Choice Function AUTO* Automatically detect the type of input signals and select ...
Ce manuel est également adapté pour les modèles :Home cinéma - YHT-292 (2.53 mb)