6. The EFFECT BYPASS footswitch allows you to bypass the effects if your hands are not free to push the button. 7. The EFFECT SEND jack is for sending audio signals to an external effects device. 8. The EFFECT RETURN jacks bring the audio from an external effects device back into the GigaMix. MAIN 1. The Graphic Equalizer shapes the sound of the Main mix before it is sent to the main speakers. 2. The PHANTOM POWER button provides a 48-volt source for microphones. 3. The RUMBLE FILTER helps filte

• Plug the female end of the power cable into the GigaMix’s power socket. • Plug the male (plug) end into a properly grounded power outlet. Making Audio Connections Start by making sure the GigaMix’s power switch is turned off. Then use either 1/4” or XLR cables to connect your instruments and microphones to the GigaMix. After this, you may connect speakers to the GigaMix. There are several ways to do this: • Main (house) speakers. Connect two cables from the GigaMix’s two rear outputs to a matc

Connecting a CD or Tape Player To run pre-recorded music through the GigaMix to the main outputs, plug the left and right audio outputs of your source device into the 2-Track Return jacks. Control the level of the music with the 2-TRACK RETURN LEVEL knob in the Main section. To capture the performance on a recording device, connect two cables from the 2- Track Send jacks to the audio inputs of the destination device. Adjust the recording level using the destination device’s input controls. Conne