But their presence or absence is never an assurance that there is not something within the wall cavity. 5 System 10 InWall Speakers There must be a minimum depth behind the wall face of 3 5/8 (92 mm). Be sure to keep the edges of the cutout at least 1 inch (25 mm) away from any stud or obstruction. The speaker assembly itself (the part with the drivers mounted in it, the trimming bezel, etc.) is designed to mount to the Installation Bracket after it has been installed within the wall.
Your new speaker system is precision crafted to give you years of enjoyable, trouble free service. This manual covers the Atlantic Technology T70 series of speakers for home theater. The T70 PBM Subwoofer is covered in detail in a separate manual. Every T70 component has been optimized for use with all surround sound formats including Dolby Surround®, Dolby Pro-Logic®, Dolby Digital 5.1®, Surround EX 6.1®, and DTS®. T70 LR Front Channel Speaker The T70 LR Front Channel Speakers are two-way syste
masterpieces. Whether installed behind a screen, mounted in an entertainment unit, or displayed out in the room, they convey a level of detail and tonal realism equaled only by the live performance itself. An optional pedestal base for the 6200e LR transforms it into an elegant floor standing speaker and raises the tweeter to the optimal seated ear-level height. Still packs the big guns. Since 1989, Atlantic Technology has specialized in creating high-performance, high-value home theater speaker
Insert the frame into the cutout and using a level or square carefully align it so it is (or it appears) level. Tighten the mounting screws, which will cause the clamps to rotate and position themselves properly behind the wall, until the frame is just snug in the wall. You want the bezel to conform to the wall board, and the frame not to rattle from the speaker’s vibration but be very careful not to overtighten the screws. Painting the Speaker Assembly The white plastic frame of the speaker baf
Atlantic Technology and theAtlantic Technology logo are registered trademarks of Atlantic Technology International, Corp. Specifications are those in effect at the time of printing.Atlantic Technology International, Corp. reserves the right to change specifications or designs at any time without notice without obligation to modify existing units. System 1400 and 2400 High Performance Loudspeaker Components Thank you for choosing Atlantic Technology products. Your new speaker components are preci
The terminals themselves are designed to allow the use of very heavy speaker wire or connectors. Be sure to tighten them securely, but don’t over-tighten them. WARNING: To prevent risk of electrical shock or damage to your equipment, always switch off the amplifier or receiver when making any system connections. You can connect your speakers by using a variety of audio connectors such as banana plugs, pin connectors, spade lugs, etc., or you can: 1. Remove .” (13mm) of insulation from each wire