Fig. 8 Forward Reverse Forward/ Reverse switch WARNING To reduce the risk of injury, keep hands and away from the bit and all moving parts. Fig. 7 WARNING To reduce the risk of explosion, electric shock and property damage, always check the work area for hidden pipes and wires before drilling. WARNING To reduce the risk of injury, only grasp tool by handle and red insulated surfaces (Fig. 8). Do not hold gray gear case when impacting or drilling. OPERATION WARNING When tool is not in use, lock t

Fig. 6 Forward Reverse Forward/ Reverse Switch 1. For forward (clockwise) rotation, push the forward/reverse switch in the direction shown. Check the direction of rotation before use. 2. For reverse (counterclockwise) rotation, push the forward/reverse switch in the direction shown. Check the direction of rotation before use. WARNING To reduce the risk of injury, keep hands and cord away from the bit and all moving parts. WARNING To reduce the risk of explosion, electric shock and property damag

Use only specifically recommended accessories. Others may be hazardous. Removing and Replacing Quik-Lok® Cords (Fig. 1) Cat. No. 9072-20, 9072-22, 9092-20 and 9096-20 MILWAUKEE's exclusive Quik-Lok® Cords provide instant fi eld replacement or substitution. Fig. 3 Drive shank Fig. 1 1. To remove the Quik-Lok® Cord, turn the cord nut 1/4 turn to the left and pull it out. 2. To replace the Quik-Lok® Cord, align the connector keyways and push the connector in as far as it will go. Turn the cord nut

13135 WEST LISBON RD. BROOKFIELD, WIS. Route red brush assembly leadwire #2 through wire traps as shown. DATE Mar. 2010 BULLETIN 58-01-1830 ROUTE THE LEADWIRES BETWEEN THE POSTS. Black leadwire #5 Black leadwire #6 NOTE: On some early models, leadwires #3 and #4 may be red. Later production and service replacements are white. White leadwire #4 WIRING SPECIFICATIONS Wire No. Wire Color Origin or Part No. Gauge Length Terminals, Connectors and End Wire Preparation 1 Black 22-18-1

Reattaching the locator assembly will not change the depth setting. Driving Self-Drilling Screws intoCold-Formed Steel Framing (Fig. 13)For Adjustable Torque ScrewdriversRated 0-2500 RPM Follow this procedure when working with light gauge sheet metal, 20 gauge and thicker. The screw may hesitate slightly when it finishes breaking through the first layer of material and starts to penetrate the sheet metal. This is normal. Keep fi rm pressure on the tool until the screw is fully seated. Self-drill