Log:
Téléchargements : 4   Taille : 763 kb   Fabricant : Central Pneumatic Air Compressor  
Catégorie : Perceuses et shuropopverty

Téléchargements : 74   Taille : 3 mb   Fabricant : Central Pneumatic Air Compressor  
Catégorie : Perceuses et shuropopverty
@name

Step 5: Place the socket on the nut. To begin tightening the nut, press the TRIGGER. Step 6: If the Air Ratchet stalls while tightening, do not continue attempts to tighten the nut with the Air Ratchet. DO NOT raise the outlet pressure of the air compressor. Use the appropriate tools and methods to tighten the nut. Step 7: When the nut has been tightened, remove the Air Ratchet and socket. Step 8: If available, check the recommended torque specification for the nut. You should use a torque wrenc

Téléchargements : 1   Taille : 297 kb   Fabricant : Central Pneumatic Air Compressor  
Catégorie : Perceuses et shuropopverty

Téléchargements : 1   Taille : 659 kb   Fabricant : Central Pneumatic Air Compressor  
Catégorie : Perceuses et shuropopverty
@name

Add a few more drops after each hour of continual use. 2. Attach an air hose to the compressor’s air outlet. Connect the air hose to the air inlet of the tool. Other components, such as a connector and quick coupler, will make operation more efficient, but are not required. WARNING! TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Do not install a female quick coupler on the tool. Such a coupler contains an air valve that will allow the air tool to retain pressure and operate accidentally af

Téléchargements : 1   Taille : 762 kb   Fabricant : Central Pneumatic Air Compressor  
Catégorie : Perceuses et shuropopverty
@name

2. Obstructed trigger. 3. Incorrect lubrication or not enough lubrication. 4. Blocked air inlet screen (if equipped). 5. Air leaking from loose housing. 6. Mechanism contaminated. 1. Check for loose connections and make sure that air supply is providing enough air flow (CFM) at required pressure (PSI) to the tool's air inlet. Do not exceed maximum air pressure. 2. Clean around trigger to ensure free movement. 3. Lubricate using air tool oil and grease according to directions. 4. Clean air inlet

Téléchargements : 10   Taille : 261 kb   Fabricant : Central Pneumatic Air Compressor  
Catégorie : Perceuses et shuropopverty
@name

Follow instructions for lubricating and changing accessories. Inspect tool cords and air hoses periodically and, if damaged, have them repaired by an authorized technician. The handle must be kept clean, dry, and free from oil and grease at all times. 10. Disconnect air supply. Disconnect air hose when not in use. 11. Avoid unintentional starting. Be sure the Trigger (#8) is not depressed when carrying the Air Hammer. 12. Stay alert. Watch what you are doing, use common sense. Do not operate any

Téléchargements : 2   Taille : 209 kb   Fabricant : Central Pneumatic Air Compressor  
Catégorie : Perceuses et shuropopverty
@name

To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. (California Health & Safety Code § 25249.5, et seq. ) Warning! Operation of equipment in close proximity to a heart pacemaker could cause interference or failure of the pacemaker. Unpacking When unpacking, check to make sure the parts listed on page 6 are included. If any parts are missing or





catégories