Évaluations - 2, GPA: 5 ( )

Fabricant : FUNAI Taille : 2.53 mb Nom Fichier : Langue d'enseignement:

In some cases, inability of the player to read the file, or playback the file normally). Depending on the conditions of the recording equipment or the CD-R/RW, DVD+R/RW or DVD-R/RW disc itself, some discs can not be played on the unit. Page 24 PROBLEMS PROBLEMS If it appears that your DVD-Video player is faulty, first consult this checklist. It may be that something simple has been overlooked. Under no circumstances should you try to repair the player yourself; as this will invalidate the warranty. Only qualified service personnel can remove the cover or service this player. * When the unit is switched on the first time, S-Video will be the default video output. Press the V-SELECT button to select the correct output modes. Your current output mode will show on the VFD. NO POWER • Check if the on/off button on the front of the player is set to on. • Check if power plug is properly connected. • Check if there is power coming from the AC outlet by plugging in another appliance. NO PICTURE • Check if the TV is switched on. • Select the correct AV input on the TV. • Check the video connection. • Check if channel selector is set to AV on the TV. (See your TV manual for instructions). • When Progressive Scan is on, there is no video output signal from composite video output. In order to use Progressive Scan feature, you need to connect the TV and DVD player through the component video outputs. • Press the V-SELECT button to select the correct video output mode. Otherwise no picture or distorted picture will be found. DISTORTED PICTURE • Check the disc for fingerprints and clean with soft cloth, wiping from center to edge. • Sometimes a small amount of picture distortion may appear. This is not a malfunction. • The disc format does not match the TV-set used (PAL/NTSC). • Ensure that ONLY one video output is connected. NO COLOR IN PICTURE • The disc format is not according to the TV-set used (PAL/NTSC). • Ensure DVD player is not connected through VCR. PICTURE INTERFERENCE • Relocate the unit further away from possible interference or emission source (e.g. Radio, Power Amplifier, radiator etc.). NO RETURN TO START-UP SCREEN WHEN DISC IS REMOVED • Check to see if the program requires another disc to be loaded. • Reset by unplugging the player from the power, then connect the power again. THE PLAYER DOES NOT RESPOND TO THE REMOTE CONTROL • Aim the remote control directly at the sensor on the front of the player. • Avoid all obstacles which may interfere with the signal path. • Inspect or replace the batteries. NO SOUND • Check audio connections. • If using a Hi-Fi amplifier, try another sound source. • Check that DTS digital out is selected in the Audio Menu if a DTS disc is played. • Ensure there is a DTS decoder connected when selecting DTS. • Clean the disc. • Check if the disc is defective by trying another disc. NO AUDIO AT DIGITAL OUTPUT • Check the digital connections • Check the Digital Out menu to make sure that the digital output is correctly set. • Check if the audio format of the selected audio language matches your unit capabilities. DISC CANNOT BE PLAYED • Ensure disc is placed properly into the disc tray. YOU HAVE FORGOTTEN THE PASSWORD • When the disc loading tray is empty, press Number Key 7, Number Key 6, Number Key 4, Number Key 1 and Number 8 on Remote Control in order. IMPROPER FUNCTIONING • The normal function of the product may be disturbed by external interference. Just reset the product (disconnecting and reconnecting the power cord might be required to resume normal operation). Page 25 SECURITE SECURITE AVERTISSEMENT RISQUES D’ELECTROCUTION NE PAS OUVRIR. Les symboles de l'eclair et de la pointe de fleche dans un triangle permettent d'alerter l'utilisateur de la presence de 'tension dangereuse' non isolee a l'interieur de l'appareil, d'une force telle qu'elle constitue un risque serieux d'electrocution. Le point d'exclamation a l'interieur du triangle permet d'alerter l'utilisateur de la presence d'instructions d'operation et d'entretien importantes accompagnant le produit. AVERTISSEMENTS: Afin de reduire les risques d'incendie ou d'electrocution, ne pas exposer cet appareil a la pluie ni a l'humidite. Il y a presence de tension electrique dangereuse a l'interieur de l'appareil. Ne tentez pas de reparer vous-meme l'appareil. Confiez toute reparation a un technicien qualifie. Le reglage ou l'utilisation de commandes ou d'ajustements qui ne sont pas specifies dans ce guide peuvent vous exposer a des radiations dangereuses. NE RETIREZ PAS ET N'OUVREZ PAS LE BOITIER. LASER: Type: 60 Circuits laser GaAIA a semiconducteurs Longueur d'onde: 650 nm (DVD) 780 nm (VCD, CD) Capacite de puissance a la sortie : 7 mW (DVD)...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :